topic How to configure wccp and what are the commands of wccp used in ver:5.3.3 on WAE model#7341 in Application Networking

How to configure wccp and what are the commands of wccp used in ver:5.3.3 on WAE model#7341

Mohammad Babjani — Wed, 19 Feb 2014 19:30:33 GMT

Dear all,

Can any one suggest what are the commands required during configuration of wccp on a WAE device of model #7341 with version 5.3.3 of IOS .

Kanwaljeet Singh — Wed, 19 Feb 2014 19:41:27 GMT

Hi Mohammad,

Something like this:

waas01(config)#interception-method wccp

waas01(config)#wccp router-list 1 x.x.x.x

waas01(config)#wccp tcp-promiscuous service-pair 61 62 failure-detection 30

waas01(config)#wccp tcp-promiscuous service-pair 61 62 router-list-num 1

Router list has been added. Please enable service.

Regards,

Kanwal

Mohammad Babjani — Wed, 19 Feb 2014 20:07:42 GMT

And for L2 redirection the same will work.....

Balakrishnan Rajvel — Thu, 20 Feb 2014 11:21:23 GMT

Hi ,

For L2 redirection choose redirect method as "WCCP L2" and egress method as "L2" from the configuration - intereception menu.

Regards,

Bala

Jorge Bejarano — Thu, 27 Feb 2014 02:43:09 GMT

Mohammad,

Here you have a link for 5.3.1 but essentially it should still be valid:

Depending on the router, you may consider what options to use.

Jorge