topic Configure CSM to persist SSL connection on the same Server in Application Networking

Configure CSM to persist SSL connection on the same Server

rsoave — Wed, 28 Jul 2004 18:59:32 GMT

Hi everyone,

I have a environment with a 6509 Switch with a CSM board installed, and I would like to know how I configure to a client when make a connection on the SSL Server, "Sticky"the SSl connection and nor balance in other server in a Server Farm.

Any help is welcome.

Regards.

Re: Configure CSM to persist SSL connection on the same Server

jfoerster — Thu, 29 Jul 2004 06:29:19 GMT

HI Rodrigo,

you have to possibilites. You can either stick on the source-ip or on the ssl-id. this ensures, that the clients SSL-Session is always send to the same "server"(SSL-Module/SCA/or real server).

Hope that helps.

Cheers,

Joerg

If you do SSL-Offloading be aware that sometimes you have to do URL-rewriting

Re: Configure CSM to persist SSL connection on the same Server

Gilles Dufour — Thu, 29 Jul 2004 16:30:53 GMT

here is a link to the command you need.

Just used the default for offset and length.

http://www.cisco.com/en/US/products/hw/switches/ps708/products_command_reference_chapter09186a00801c58c6.html#1059924

Gilles.