topic Line Protocol Down in Application Networking

Line Protocol Down

balakrishnansenthil — Wed, 12 Sep 2012 02:46:27 GMT

Hi Team,

In our data centre we are using 4 WAAS.......

WAAS001

WAAS002

WAAS003

WAAS004

In WAAS002 is showing in interface line protocol down.Which is connected with WAN Switch.

When i checked other WAAS's it's configured below "Mode: autoselect, full-duplex, 1000baseTX" is it important

The " full-duplex, 1000baseTX" is missing in this WAAS002 config.... is it problem?....

Please let me know ASAP.

Some more showing Major Alarms's also.....

Logs:

====

WAAS002#sh interface gigabitEthernet 0/1

Type:Ethernet

Ethernet address:50:3D:E5:9D:2F:8A

Maximum Transfer Unit Size:1500

Metric:1

Packets Received: 0

Input Errors: 0

Input Packets Dropped: 0

Input Packets Overruns: 0

Input Packets Frames: 0

Packet Sent: 0

Output Errors: 0

Output Packets Dropped: 0

Output Packets Overruns: 0

Output Packets Carrier: 0

Output Queue Length:1000

Collisions: 0

Flags:UP BROADCAST SLAVE MULTICAST

Link State: Interface is up,line protocol down

Mode: autoselect --------------------------------------------------- Showing Down : no duplex config : is it problem?.....

Logs From WAAS004:

===============

NOSXXXX-WAAS004#sh interface GigabitEthernet 0/1
Type:Ethernet
Ethernet address:50:3D:E5:9D:54:3B
Maximum Transfer Unit Size:1500
Metric:1
Packets Received: 5614994
Input Errors: 0
Input Packets Dropped: 0
Input Packets Overruns: 0
Input Packets Frames: 0
Packet Sent: 454446
Output Errors: 0
Output Packets Dropped: 0
Output Packets Overruns: 0
Output Packets Carrier: 0
Output Queue Length:1000
Collisions: 0
Flags:UP BROADCAST RUNNING ALLMULTI SLAVE MULTICAST
Link State: Interface is up,line protocol up
Mode: autoselect, full-duplex, 1000baseTX -------------- Working Fine
NOSXXXX-WAAS004#

Logs:

====

WAAS002#show alarms

Critical Alarms:

----------------

Alarm ID Module/Submodule Instance

--------------- -------------------- ---------------

1 mstore_key_retrieval cms ssl_mstore_key

2 mstore_key_failure sslao mstore_key_failure

Major Alarms:

-------------

Alarm ID Module/Submodule Instance

--------------- -------------------- ---------------

1 rtr_unreachable WCCP/svc061/rtr10.154.13.126

2 rtr_unreachable WCCP/svc062/rtr10.154.13.126

Minor Alarms:

-------------

None

Thanks.............

Regards,

SenthilKumar

Hp:+65-91004894

Singapore

Re: Line Protocol Down

balakrishnansenthil — Wed, 12 Sep 2012 04:38:15 GMT

Please Any Update...........

And also am getting bellow Error on other WAAS003......

Logs:

====

2012 Sep 12 09:57:53 WAAS03 java: %WAAS-CMS-4-700001: ce(SslMstoreKeyFetcher): Failed to fetch SSL managed store encrption key: Operation timed out
2012 Sep 12 10:06:23 WAAS03 java: %WAAS-CMS-4-700001: ce(SslMstoreKeyFetcher): Failed to fetch SSL managed store encrption key: Operation timed out
2012 Sep 12 10:09:15 WAAS03 java: %WAAS-CMS-4-716058: ce(DataFeedPoll): Cannot get updates from 10.154.13.117
2012 Sep 12 10:14:54 WAAS03 java: %WAAS-CMS-4-700001: ce(SslMstoreKeyFetcher): Failed to fetch SSL managed store encrption key: Operation timed out
2012 Sep 12 10:20:53 WAAS03 java: %WAAS-CMS-4-716058: ce(DataFeedPoll): Cannot get updates from 10.154.13.117
2012 Sep 12 10:23:24 WAAS03 java: %WAAS-CMS-4-700001: ce(SslMstoreKeyFetcher): Failed to fetch SSL managed store encrption key: Operation timed out
2012 Sep 12 10:31:54 WAAS03 java: %WAAS-CMS-4-700001: ce(SslMstoreKeyFetcher): Failed to fetch SSL managed store encrption key: Operation timed out
2012 Sep 12 10:32:31 WAAS03 java: %WAAS-CMS-4-716058: ce(DataFeedPoll): Cannot get updates from 10.154.13.117

Re: Line Protocol Down

balakrishnansenthil — Thu, 13 Sep 2012 02:13:01 GMT

Hi,

URGENT

Please Update me the status..............

Waiting for update from your side..........

Thanks..................

Regards,

Senthil