topic WAAS & Syslog in Application Networking

WAAS & Syslog

Zubair.Sayed_2 — Mon, 02 Apr 2012 13:57:07 GMT

Hi Guys

I am trying to configure our WAAS environment which includes WAE's and WCM's to send syslog alerts and notifications to the Syslog server.

I have configured our syslog host on the WCM and on each WAE using the following config on the devices.

logging host 10.x.x.x priority error
logging host 10.x.x.x priority error
logging console enable
logging console priority information

I also have a firewall between the logging the server and the WAAS environment and rules have been created.

Please advise as if I login to the WCM I see alarms, if I log on the corresponding WAE device and issue "sh alarms" there are alarms but I dont see them in syslog alerts?

Thanks

Zubair

WAAS & Syslog

pevaneyn — Sat, 07 Apr 2012 12:04:09 GMT

Hello Zubair,

To monitor for alarms you should use the XML interface to the CM or use snmp to poll the WAE devices.

Syslog is not a nice way as it is UDP and the alarm messages are not uniform.

Best regards, Peter

WAAS & Syslog

Zubair.Sayed_2 — Wed, 11 Apr 2012 07:19:43 GMT

Hi Peter.

Many thanks for taking time to respond.

I have however managed to get syslog working, I added the above config to all the WAE's and CM's in the environment and we now receiving syslog messages.

I must agree with you that since seeing a few of the syslog messages they not very friendly and do not explain much.

We do from time to time login to the CM but this means if we are not logging in for a while we do not see the alarms.

Please expand on the XML interface you mention?

Regards

Zubair

WAAS & Syslog

pevaneyn — Thu, 12 Apr 2012 13:22:30 GMT

Hello Zubair,

For the XML interface see:

http://www.cisco.com/en/US/docs/app_ntwk_services/waas/waas/v441/monitoring/guide/MG_XML_API.html

http://www.cisco.com/en/US/docs/app_ntwk_services/waas/waas/v441/api/reference/guide/pref_api.html

I wrote an example in perl at

https://supportforums.cisco.com/docs/DOC-13202

Best regards, Peter