ACNS re-image/format

panayiotiscy — Thu, 19 Jan 2012 11:25:59 GMT

Hello Nepros,

We would like to re-image or even format our ACNS and start over again.

Can any one provide us with some details?

Thank you

ACNS re-image/format

Daniel Arrondo Ostiz — Thu, 19 Jan 2012 13:12:14 GMT

Hi Panayiotis,

This exact procedure depends on what you need to do. If you just want to restore an empty configuration, you can use the command "ACNS# restore factory-default"

If you, however, would like to do a full reinstall of the software, then, you would need to use the rescue CD for that. You can download it from

http://www.cisco.com/cisco/software/release.html?mdfid=280449918&flowid=120&softwareid=280836717&release=5.5.23&relind=AVAILABLE&rellifecycle=&reltype=latest

Once you have booted from the CD, you will get to a menu. In that one, the options you need to choose for a full reinstall of the software are (in order):

2 - Manufacture flash
3 - Install flash cookie
5 - Install flash image from CD-rom
7 - Wipe out disks and install .bin image

I hope this helps

Daniel

ACNS re-image/format

panayiotiscy — Fri, 20 Jan 2012 06:10:44 GMT

Hello Daniel,

This is exactly what i have been looking for!

I'm proceeding with the instructions!

Once again,thank you

topic ACNS re-image/format in Application Networking

ACNS re-image/format

ACNS re-image/format

ACNS re-image/format