topic WAE https problem in Application Networking

WAE https problem

Kamol Pranweerapaiboon — Mon, 27 Sep 2010 02:08:08 GMT

Hi Friends

I use ACNS (ce612-5.5.9.9) , and I use https redirect from C6500 .Generally it can work by below configuration on WAE Side.

      !
      https proxy incoming 443
      wccp https-cache router-list-num 1
      wccp router-list 1 172.20.161.254
      !

However , I find the problem that when this equipment reboot , one command line has been lost "wccp https-cache router-list-num 1" and I have to maunaully add this command for https.

I would like to know how I can fix this issue

Thank you

Kamol

Re: WAE https problem

ahskhan — Mon, 27 Sep 2010 15:14:51 GMT

Hi,

Is this device managed by a CDM? if so can you check on the CDM if WCCP configurations are present and if / or overwritten by another group. If not please review your

errorlog/cli-errorlog.current file after the reboot and see where do you see "no wccp https-cache router-list-num 1".

Let me know if this helps.

Ahsan

Re: WAE https problem

Kamol Pranweerapaiboon — Tue, 28 Sep 2010 02:00:28 GMT

Hi Ahsan

Thank you for your reply ,We don't have a CDM on the network. let me check the log file and let you know.

After we check on local1/errorlog/cli-errorlog.current , I don't see "no wccp https-cache router-list-num 1" ,as you refer.

Kamol

Message was edited by: Kamol Pranweerapaiboon