topic Re: – Enable high availability and redundancy for Cisco WAAS in Application Networking https://community.cisco.com/t5/application-networking/enable-high-availability-and-redundancy-for-cisco-waas/m-p/1527316#M48628 <HTML><HEAD></HEAD><BODY><P>Hi,</P><P><SPAN class="content"></SPAN></P><P class="pB1_Body1">You can serially cluster two WAE devices with the Cisco WAE Inline&nbsp; Network Adapter installed to provide higher availability in the data&nbsp; center if a device fails. If the current optimizing device fails, the&nbsp; inline group shuts down, or the device becomes the overloaded, the&nbsp; second WAE device in the cluster provides the optimization services.&nbsp; Deploying WAE devices in a serial inline cluster for scaling or load&nbsp; balancing is not supported.</P><P class="pB1_Body1">More deatils here: <SPAN class="content"></SPAN><A href="http://www.cisco.com/en/US/docs/app_ntwk_services/waas/waas/v421/configuration/guide/traffic.html#wp1065911">Clustering Inline WAEs</A></P><P class="pB1_Body1"></P><P class="pB1_Body1">Hope this helps.</P><P class="pB1_Body1"></P><P class="pB1_Body1">Regards.</P><P class="pB1_Body1"></P><P class="pB1_Body1">PS: Please mark this as <STRONG>Answered, </STRONG>if this answers your question.</P><P></P></BODY></HTML> Fri, 24 Sep 2010 17:15:54 GMT Bhavin Yadav 2010-09-24T17:15:54Z – Enable high availability and redundancy for Cisco WAAS https://community.cisco.com/t5/application-networking/enable-high-availability-and-redundancy-for-cisco-waas/m-p/1527315#M48627 <P>How this is available</P><P></P><P>– Enable high availability and redundancy for Cisco WAAS appliances in data centers.</P><P></P><P>Thank you.</P> Fri, 24 Sep 2010 08:54:23 GMT https://community.cisco.com/t5/application-networking/enable-high-availability-and-redundancy-for-cisco-waas/m-p/1527315#M48627 Muhammed AKYUZ 2010-09-24T08:54:23Z Re: – Enable high availability and redundancy for Cisco WAAS https://community.cisco.com/t5/application-networking/enable-high-availability-and-redundancy-for-cisco-waas/m-p/1527316#M48628 <HTML><HEAD></HEAD><BODY><P>Hi,</P><P><SPAN class="content"></SPAN></P><P class="pB1_Body1">You can serially cluster two WAE devices with the Cisco WAE Inline&nbsp; Network Adapter installed to provide higher availability in the data&nbsp; center if a device fails. If the current optimizing device fails, the&nbsp; inline group shuts down, or the device becomes the overloaded, the&nbsp; second WAE device in the cluster provides the optimization services.&nbsp; Deploying WAE devices in a serial inline cluster for scaling or load&nbsp; balancing is not supported.</P><P class="pB1_Body1">More deatils here: <SPAN class="content"></SPAN><A href="http://www.cisco.com/en/US/docs/app_ntwk_services/waas/waas/v421/configuration/guide/traffic.html#wp1065911">Clustering Inline WAEs</A></P><P class="pB1_Body1"></P><P class="pB1_Body1">Hope this helps.</P><P class="pB1_Body1"></P><P class="pB1_Body1">Regards.</P><P class="pB1_Body1"></P><P class="pB1_Body1">PS: Please mark this as <STRONG>Answered, </STRONG>if this answers your question.</P><P></P></BODY></HTML> Fri, 24 Sep 2010 17:15:54 GMT https://community.cisco.com/t5/application-networking/enable-high-availability-and-redundancy-for-cisco-waas/m-p/1527316#M48628 Bhavin Yadav 2010-09-24T17:15:54Z