topic Re: WAAS in a hybrid configuration (WCCP and inline modes) in Application Networking https://community.cisco.com/t5/application-networking/waas-in-a-hybrid-configuration-wccp-and-inline-modes/m-p/1367343#M50211 <HTML><HEAD></HEAD><BODY><P>Hi Fujimura,</P><P></P><P>The network integration/interception method you choose is site specific.&nbsp; It is perfectly fine to use WCCP at some sites and Inline at others.&nbsp; The WAAS devices are not aware what the peer WAAS devices on the other side of the WAN are using for interception.</P><P></P><P>Regards,</P><P>Zach</P></BODY></HTML> Wed, 21 Apr 2010 16:10:17 GMT Zach Seils 2010-04-21T16:10:17Z WAAS in a hybrid configuration (WCCP and inline modes) https://community.cisco.com/t5/application-networking/waas-in-a-hybrid-configuration-wccp-and-inline-modes/m-p/1367342#M50210 <P>Is it possible to configure WAAS solution in a hybrid configuration, with the central office working in wccp mode and the remote offices in inline mode?</P><P>If it is possible, will I have some impact in the solution performance?</P><P></P><P>Best Regards.<BR />Fujimura.</P> Thu, 15 Apr 2010 14:39:52 GMT https://community.cisco.com/t5/application-networking/waas-in-a-hybrid-configuration-wccp-and-inline-modes/m-p/1367342#M50210 cfujimura 2010-04-15T14:39:52Z Re: WAAS in a hybrid configuration (WCCP and inline modes) https://community.cisco.com/t5/application-networking/waas-in-a-hybrid-configuration-wccp-and-inline-modes/m-p/1367343#M50211 <HTML><HEAD></HEAD><BODY><P>Hi Fujimura,</P><P></P><P>The network integration/interception method you choose is site specific.&nbsp; It is perfectly fine to use WCCP at some sites and Inline at others.&nbsp; The WAAS devices are not aware what the peer WAAS devices on the other side of the WAN are using for interception.</P><P></P><P>Regards,</P><P>Zach</P></BODY></HTML> Wed, 21 Apr 2010 16:10:17 GMT https://community.cisco.com/t5/application-networking/waas-in-a-hybrid-configuration-wccp-and-inline-modes/m-p/1367343#M50211 Zach Seils 2010-04-21T16:10:17Z