topic Re: MIMIX port for Cisco WAE in Application Networking

MIMIX port for Cisco WAE

afdil — Wed, 20 Jun 2007 09:43:01 GMT

We need to know about MIMIX port at IBM AS/400, we are now doing POC using Cisco WAE, here is the topology :

DC--> Cat6513 <------>Cat6513 <---DRC

| |

Cisco WAE Cisco WAE

our cisco WAE can not capture traffic from MIMIX IBM AS/400.

please we need advice for this case.

Regards

afdilah.syafar@multipolar.com

Re: MIMIX port for Cisco WAE

Zach Seils — Sat, 23 Jun 2007 04:46:13 GMT

Afdllah,

Are you using Cisco WAAS? If so, can you please provide some additional information on how you are performing interception?

Thanks,

Zach

Re: MIMIX port for Cisco WAE

afdil — Mon, 02 Jul 2007 03:24:10 GMT

Yes, I used Cisco WAAS version 4.0.9,

i configure WCCP on both switch catalyst on interface vlan :

ip wccp 61

ip wccp 62

int vlan888

ip wccp 61 redirect out

ip wccp 62 redirect in

on interface to WAE ;

ip wccp redirect exclude in

regards

afdil

Re: MIMIX port for Cisco WAE

iwanc — Thu, 12 Jul 2007 03:36:09 GMT

Zach,

Have you ever try WAAS to accelerate MIMIX traffic? Could you share your configuration?

Thanks,

Iwan

Re: MIMIX port for Cisco WAE

Zach Seils — Thu, 12 Jul 2007 13:33:34 GMT

Iwan,

I have not personally used WAAS to accelerate MIMIX traffic.

Thanks,

Zach

Re: MIMIX port for Cisco WAE

iwanc — Fri, 13 Jul 2007 07:15:46 GMT

Hi Zach,

But, do you have any documentation that mention WAAS able to accelerate MIMIX traffic or user guide about it? Because I cannot find it on cisco website and I am afraid that Cisco WAAS is unable to accelerate MIMIX.

Thanks,

Iwan

Re: MIMIX port for Cisco WAE

Zach Seils — Sat, 14 Jul 2007 03:59:18 GMT

Ivan,

I checked internally, but was unable to find any references for WAAS optimizing MIMIX traffic. However, this doesn't mean that it isn't possible. Have you tried? Do you know the TCP ports being used?

Zach

Re: MIMIX port for Cisco WAE

iwanc — Mon, 16 Jul 2007 05:43:10 GMT

Zach,

I have tried it with several scenario. First, using default WAAS policy. Second, create new policy using destination and source port from 1000-65000. Both scenario give no result. I have no idea the exact TCP port for MIMIX.

Iwan

Re: MIMIX port for Cisco WAE

afdil — Tue, 17 Jul 2007 02:33:41 GMT

zach,

when i'm doing POC to optimize MIMIX,

i use command :

#show tfo connection summary

and output of this command :

Local-IP:Port Remote-IP:Port Conn Type

10.204.230.2:50007 10.204.229.2:56028 PT In Progress

10.204.229.2:56028 10.254.20.11:50007 PT In Progress

ip add 10.204.230.2 is MIMIX server in DC

ip add 10.204.229.2 is MIMIX server in DRC

i already used that port to optimize MIMIX,

but still not optimize

Re: MIMIX port for Cisco WAE

Zach Seils — Wed, 18 Jul 2007 14:17:14 GMT

AFDILAH,

You can use the debug command:

debug tfo conn auto

to determine why the connection is going into pass-through.

Zach

Re: MIMIX port for Cisco WAE

iwanc — Fri, 20 Jul 2007 06:12:27 GMT

Thank Zach, we will try it. But unfortunately, we cannot do it soon. We need time to setup the lab.

Thanks.