ACE 4710 | Bridged Mode | secondary subnet on VLAN

vaib7av.shirkul — Wed, 07 Dec 2022 12:53:29 GMT

I know, Cisco ACE is a very age old product now, but one of our client is still using it and need help to configure new VIP.

Network diagram is attached for easy understanding. (RED marked is working and Blue marked in NEW)

- device is in bridged mode.

- rserver, bridge interface and server side vlan is on the same subnet. (this is already working)

- server side Vlan on the core have TWO subnets.

interface Vlan150

ip address 172.21.11.195 255.255.255.224 secondary

ip address 172.21.11.227 255.255.255.224

Issue :

- We have configured rserver from "secondary" but VIP is not pinging from client end and not even from ACE itself. I think it needs additional bvi interface from the same range (secondary).

It would be great if someone help here.

Thanks,

Re: ACE 4710 | Bridged Mode | secondary subnet on VLAN

balaji.bandi — Wed, 07 Dec 2022 13:19:29 GMT

not sure that going to work.

May be try adding new VLAN and add to Bridge group (exiting)

or totally new bridget group and add new vlan

topic ACE 4710 | Bridged Mode | secondary subnet on VLAN in Application Networking

ACE 4710 | Bridged Mode | secondary subnet on VLAN

Re: ACE 4710 | Bridged Mode | secondary subnet on VLAN