topic Re: what is 'application ssl' do? in Application Networking https://community.cisco.com/t5/application-networking/what-is-application-ssl-do/m-p/9008#M53 <HTML><HEAD></HEAD><BODY><P>The "advanced-balance ssl" command is actually the command that initiates sticking on the SSL session ID. The "application ssl" tells the CSS that it needs to look at the appropriate offset in the packet for the SSL session id. Remember that this is post handshake so the url "/*" command has to be used to bump the rule up to an L5 rule.</P></BODY></HTML> Thu, 04 Oct 2001 20:39:20 GMT b-hamm 2001-10-04T20:39:20Z what is 'application ssl' do? https://community.cisco.com/t5/application-networking/what-is-application-ssl-do/m-p/9006#M51 <P>What is the 'application ssl' do? I can set protocol tcp and port 443 and everything seems to work fine. Does it have to work with 'advanced-balance ssl' too?</P><P></P><P>Thanks.</P><P></P><P>Brad</P> Fri, 22 Jun 2001 20:44:47 GMT https://community.cisco.com/t5/application-networking/what-is-application-ssl-do/m-p/9006#M51 bradley.wong 2001-06-22T20:44:47Z Re: what is 'application ssl' do? https://community.cisco.com/t5/application-networking/what-is-application-ssl-do/m-p/9007#M52 <HTML><HEAD></HEAD><BODY><P>It's an advanced config parameter for configuring stickyness on ssl. Take a look at this for more information <A class="jive-link-custom" href="http://www.cisco.com/univercd/cc/td/doc/product/webscale/css/advcfggd/sticky.htm" target="_blank">http://www.cisco.com/univercd/cc/td/doc/product/webscale/css/advcfggd/sticky.htm</A></P></BODY></HTML> Wed, 27 Jun 2001 20:30:46 GMT https://community.cisco.com/t5/application-networking/what-is-application-ssl-do/m-p/9007#M52 j-block 2001-06-27T20:30:46Z Re: what is 'application ssl' do? https://community.cisco.com/t5/application-networking/what-is-application-ssl-do/m-p/9008#M53 <HTML><HEAD></HEAD><BODY><P>The "advanced-balance ssl" command is actually the command that initiates sticking on the SSL session ID. The "application ssl" tells the CSS that it needs to look at the appropriate offset in the packet for the SSL session id. Remember that this is post handshake so the url "/*" command has to be used to bump the rule up to an L5 rule.</P></BODY></HTML> Thu, 04 Oct 2001 20:39:20 GMT https://community.cisco.com/t5/application-networking/what-is-application-ssl-do/m-p/9008#M53 b-hamm 2001-10-04T20:39:20Z