topic CSS loadbalancing &quot;Telnet&quot; in Application Networking https://community.cisco.com/t5/application-networking/css-loadbalancing-quot-telnet-quot/m-p/354841#M5960 <P>Hello:</P><P></P><P>I have a CSS 11501 where I need to balance Telnet,I can´t get service up and running.</P><P>My client need telnet to server connected to a server farm. I adjunt config and Troubleshooting.</P><P></P><P></P><P>!*************************** GLOBAL ***************************</P><P> ip route 0.0.0.0 0.0.0.0 192.168.198.1 1</P><P></P><P>!************************* INTERFACE *************************</P><P>interface e7</P><P> bridge vlan 16</P><P></P><P>interface e8</P><P> bridge vlan 16</P><P></P><P>!************************** CIRCUIT **************************</P><P>circuit VLAN1</P><P></P><P> ip address 192.168.198.200 255.255.255.0</P><P></P><P>circuit VLAN16</P><P></P><P> ip address 10.10.10.1 255.255.255.0</P><P></P><P>!************************** SERVICE **************************</P><P>service serv1 </P><P> description "Server for Telnet"</P><P> ip address 10.10.10.2</P><P> active</P><P></P><P>!*************************** OWNER ***************************</P><P>owner CSS</P><P></P><P> content Telnet</P><P> vip address 192.168.198.100</P><P> add service serv1</P><P> protocol tcp</P><P> port 23</P><P> active</P><P></P><P></P><P></P><P>CSS11050# sh ser</P><P></P><P>Services (2 entries):</P><P></P><P></P><P> Name: serv1 Index: 2</P><P> Type: Local State: Alive</P><P> Rule ( 10.10.10.2 ANY ANY )</P><P> Redirect Domain:</P><P> Redirect String:</P><P> Keepalive: (ICMP 5 3 5 )</P><P> Last Clearing of Stats Counters: 11/09/2004 05:20:12</P><P> Mtu: 1500 State Transitions: 6</P><P> Mtu: 1500 State Transitions: 6</P><P> Total Connections: 12 Total Reused Conns: 0</P><P> Weight: 1 Load: 2</P><P> DFP: Disable</P><P></P><P></P><P></P><P></P><P>CSS11050# sh summary</P><P>Global Bypass Counters:</P><P> No Rule Bypass Count: 0</P><P> Acl Bypass Count: 0</P><P></P><P>Owner Content Rules State Services Service Hits</P><P></P><P>CSS Telnet Active serv1 1</P><P></P><P></P><P></P><P></P><P>CSS11050# sh service summary</P><P></P><P>Service Name State Conn Weight Avg State Idx</P><P> Load Transitions</P><P></P><P>serv1 Alive 0 1 2 6 2</P><P></P><P></P><P></P> Tue, 09 Nov 2004 12:25:00 GMT pbadorrey 2004-11-09T12:25:00Z CSS loadbalancing "Telnet" https://community.cisco.com/t5/application-networking/css-loadbalancing-quot-telnet-quot/m-p/354841#M5960 <P>Hello:</P><P></P><P>I have a CSS 11501 where I need to balance Telnet,I can´t get service up and running.</P><P>My client need telnet to server connected to a server farm. I adjunt config and Troubleshooting.</P><P></P><P></P><P>!*************************** GLOBAL ***************************</P><P> ip route 0.0.0.0 0.0.0.0 192.168.198.1 1</P><P></P><P>!************************* INTERFACE *************************</P><P>interface e7</P><P> bridge vlan 16</P><P></P><P>interface e8</P><P> bridge vlan 16</P><P></P><P>!************************** CIRCUIT **************************</P><P>circuit VLAN1</P><P></P><P> ip address 192.168.198.200 255.255.255.0</P><P></P><P>circuit VLAN16</P><P></P><P> ip address 10.10.10.1 255.255.255.0</P><P></P><P>!************************** SERVICE **************************</P><P>service serv1 </P><P> description "Server for Telnet"</P><P> ip address 10.10.10.2</P><P> active</P><P></P><P>!*************************** OWNER ***************************</P><P>owner CSS</P><P></P><P> content Telnet</P><P> vip address 192.168.198.100</P><P> add service serv1</P><P> protocol tcp</P><P> port 23</P><P> active</P><P></P><P></P><P></P><P>CSS11050# sh ser</P><P></P><P>Services (2 entries):</P><P></P><P></P><P> Name: serv1 Index: 2</P><P> Type: Local State: Alive</P><P> Rule ( 10.10.10.2 ANY ANY )</P><P> Redirect Domain:</P><P> Redirect String:</P><P> Keepalive: (ICMP 5 3 5 )</P><P> Last Clearing of Stats Counters: 11/09/2004 05:20:12</P><P> Mtu: 1500 State Transitions: 6</P><P> Mtu: 1500 State Transitions: 6</P><P> Total Connections: 12 Total Reused Conns: 0</P><P> Weight: 1 Load: 2</P><P> DFP: Disable</P><P></P><P></P><P></P><P></P><P>CSS11050# sh summary</P><P>Global Bypass Counters:</P><P> No Rule Bypass Count: 0</P><P> Acl Bypass Count: 0</P><P></P><P>Owner Content Rules State Services Service Hits</P><P></P><P>CSS Telnet Active serv1 1</P><P></P><P></P><P></P><P></P><P>CSS11050# sh service summary</P><P></P><P>Service Name State Conn Weight Avg State Idx</P><P> Load Transitions</P><P></P><P>serv1 Alive 0 1 2 6 2</P><P></P><P></P><P></P> Tue, 09 Nov 2004 12:25:00 GMT https://community.cisco.com/t5/application-networking/css-loadbalancing-quot-telnet-quot/m-p/354841#M5960 pbadorrey 2004-11-09T12:25:00Z Re: CSS loadbalancing "Telnet" https://community.cisco.com/t5/application-networking/css-loadbalancing-quot-telnet-quot/m-p/354842#M5961 <HTML><HEAD></HEAD><BODY><P>What devices are connected to interfaces e7 and e8?</P><P></P><P>~Zach</P></BODY></HTML> Wed, 10 Nov 2004 17:35:37 GMT https://community.cisco.com/t5/application-networking/css-loadbalancing-quot-telnet-quot/m-p/354842#M5961 seilsz 2004-11-10T17:35:37Z Re: CSS loadbalancing "Telnet" https://community.cisco.com/t5/application-networking/css-loadbalancing-quot-telnet-quot/m-p/354843#M5962 <HTML><HEAD></HEAD><BODY><P>Hi, </P><P>What's the server's default gateway? It should be the CSS vips of the back-end. </P><P></P><P></P></BODY></HTML> Sun, 21 Nov 2004 07:16:34 GMT https://community.cisco.com/t5/application-networking/css-loadbalancing-quot-telnet-quot/m-p/354843#M5962 wim.juste 2004-11-21T07:16:34Z