topic Re: Arrowpoint CS-800 Flows in Application Networking https://community.cisco.com/t5/application-networking/arrowpoint-cs-800-flows/m-p/373364#M6436 <HTML><HEAD></HEAD><BODY><P>Hi Gilles,</P><P></P><P>Version is 5.00 Build 69</P><P>Mode enable, I just make a command "flow stat"</P><P></P><P>The problem is that when flow arrive to 7200, it reboot.</P><P>Note that the CSS800 is redundant on itself.</P><P></P><P>Thanks for your help</P><P>Javier</P></BODY></HTML> Tue, 29 Mar 2005 18:37:24 GMT jivarva 2005-03-29T18:37:24Z Arrowpoint CS-800 Flows https://community.cisco.com/t5/application-networking/arrowpoint-cs-800-flows/m-p/373362#M6434 <P>How is the maximun flows that support CS-800..??</P><P>I have a problem when flows go up to 7000.</P><P>Maybe, the "flow timeout" is the solution..??</P><P></P><P>This is the "flow stat"</P><P></P><P>Flow Manager Statistics - SFM Slot 9, Subslot 1:</P><P> Cur High Avg</P><P>UDP Flows per second 0 258 0</P><P>TCP Flows per second 47 1289 49</P><P>Total Flows per second 47 1291 49</P><P>Hits per second 167 543 179</P><P></P><P></P><P>--------------------------------------------------</P><P> Port Active Total TCP UDP </P><P>--------------------------------------------------</P><P>#11/1 310 56143045 310 0 </P><P>#11/2 173 63890499 173 0 </P><P>#11/3 352 63065305 352 0 </P><P>#11/4 415 90889158 415 0 </P><P>#11/5 223 60797707 223 0 </P><P>#11/6 184 64834916 184 0 </P><P>#11/7 0 7320611 0 0 </P><P>#11/8 0 0 0 0 </P><P>#12/1 338 106518647 338 0 </P><P>#12/2 387 89681467 387 0 </P><P>#12/3 265 43534400 265 0 </P><P>#12/4 149 50599867 149 0 </P><P>#12/5 0 0 0 0 </P><P>#12/6 179 62061854 179 0 </P><P>#12/7 0 0 0 0 </P><P>#12/8 0 0 0 0 </P><P></P><P></P><P>Flow Manager Statistics - SFM Slot 9, Subslot 2:</P><P> Cur High Avg</P><P>UDP Flows per second 0 245 0</P><P>TCP Flows per second 65 1274 51</P><P>Total Flows per second 65 1275 51</P><P>Hits per second 166 497 169</P><P></P><P></P><P>--------------------------------------------------</P><P> Port Active Total TCP UDP </P><P>--------------------------------------------------</P><P>#13/1 0 0 0 0 </P><P>#13/2 377 41276241 377 0 </P><P>#13/3 261 100451137 261 0 </P><P>#13/4 154 52512707 154 0 </P><P>#13/5 545 120438970 545 0 </P><P>#13/6 0 0 0 0 </P><P>#13/7 0 0 0 0 </P><P>#14/1 0 0 0 0 </P><P>#14/2 1 5360071 1 0 </P><P>#14/6 4553 1223090599 4552 1 </P><P></P><P>active-800# </P> Tue, 29 Mar 2005 15:21:23 GMT https://community.cisco.com/t5/application-networking/arrowpoint-cs-800-flows/m-p/373362#M6434 jivarva 2005-03-29T15:21:23Z Re: Arrowpoint CS-800 Flows https://community.cisco.com/t5/application-networking/arrowpoint-cs-800-flows/m-p/373363#M6435 <HTML><HEAD></HEAD><BODY><P>what version do you have ?</P><P>In which mode did you capture the flow stat ?</P><P>[did you capture it from debug/llama mode ?]</P><P></P><P>What kind of problem do you have ?</P><P></P><P>The CSS800 should be able to handle much more flow than 7000.</P><P></P><P>Regards,</P><P></P><P>Gilles.</P></BODY></HTML> Tue, 29 Mar 2005 16:19:30 GMT https://community.cisco.com/t5/application-networking/arrowpoint-cs-800-flows/m-p/373363#M6435 Gilles Dufour 2005-03-29T16:19:30Z Re: Arrowpoint CS-800 Flows https://community.cisco.com/t5/application-networking/arrowpoint-cs-800-flows/m-p/373364#M6436 <HTML><HEAD></HEAD><BODY><P>Hi Gilles,</P><P></P><P>Version is 5.00 Build 69</P><P>Mode enable, I just make a command "flow stat"</P><P></P><P>The problem is that when flow arrive to 7200, it reboot.</P><P>Note that the CSS800 is redundant on itself.</P><P></P><P>Thanks for your help</P><P>Javier</P></BODY></HTML> Tue, 29 Mar 2005 18:37:24 GMT https://community.cisco.com/t5/application-networking/arrowpoint-cs-800-flows/m-p/373364#M6436 jivarva 2005-03-29T18:37:24Z