topic Re: Error setting ICAP server in Application Networking https://community.cisco.com/t5/application-networking/error-setting-icap-server/m-p/382646#M6697 <HTML><HEAD></HEAD><BODY><P>"Error setting ICAP server ". Normally this error message is received when the "keepalive-interval" is entered in the </P><P>CDM GUI. "keepalive-interval" configuration is not availble in CLI but available only in CDM GUI. To fix this problem try</P><P>disabling the keepalive on the CDM GUI or if you have latest version of the CLI, the "keepalive" command will be available and</P><P>shoul be used in the CLI configuration.</P></BODY></HTML> Wed, 06 Apr 2005 14:39:25 GMT b.hsu 2005-04-06T14:39:25Z Error setting ICAP server https://community.cisco.com/t5/application-networking/error-setting-icap-server/m-p/382645#M6696 <P>Has someone already seen the following message :</P><P></P><P>hostname(config)#icap service MYNAME server icap://AA.BB.CC.DD:1344/myproduct</P><P></P><P> Error setting ICAP server (/cfg/gl/icap/servers/MYNAME:icap:;;AA.BB.CC.DD:1344;myproduct) in DS</P><P></P><P>When setting a new ICAP server ?</P> Thu, 31 Mar 2005 15:36:18 GMT https://community.cisco.com/t5/application-networking/error-setting-icap-server/m-p/382645#M6696 serviceCSC 2005-03-31T15:36:18Z Re: Error setting ICAP server https://community.cisco.com/t5/application-networking/error-setting-icap-server/m-p/382646#M6697 <HTML><HEAD></HEAD><BODY><P>"Error setting ICAP server ". Normally this error message is received when the "keepalive-interval" is entered in the </P><P>CDM GUI. "keepalive-interval" configuration is not availble in CLI but available only in CDM GUI. To fix this problem try</P><P>disabling the keepalive on the CDM GUI or if you have latest version of the CLI, the "keepalive" command will be available and</P><P>shoul be used in the CLI configuration.</P></BODY></HTML> Wed, 06 Apr 2005 14:39:25 GMT https://community.cisco.com/t5/application-networking/error-setting-icap-server/m-p/382646#M6697 b.hsu 2005-04-06T14:39:25Z