topic Re: CSM loadbalancing in Application Networking

CSM loadbalancing

cheeseng — Sat, 09 Jul 2005 10:05:14 GMT

Hi,

I have being able to intergrate successfully my CSM with SSL on my 6500 Sup 720.

However, I have problem integrating a new serverfarm into the CSM.

The difference for this new serverfarm is that, the login page for the servers differs, for example,

server 1 = test1111/user/logon.asp

server 2 = test2222/user/logon.asp

By entering the ip address on the IE to accesss the login page is not possible. The exact URL as shown above must be invoke before you can acccess the login page.

Pls advise. Many thanks.

Re: CSM loadbalancing

Gilles Dufour — Sun, 10 Jul 2005 07:59:50 GMT

The CSM can't change the url provided by the client web browser.

Your servers should be identical if you want to loadbalance between the 2 of them.

Regards,

Gilles.

Re: CSM loadbalancing

cheeseng — Mon, 11 Jul 2005 05:23:18 GMT

Hi Gilles,

Thanks for the reply.

Can the csm loadbalance the two server if the login pages is xxx.xxx.xxx.xxx/ccmuser/logon.asp.

As currently the server that I'm intergrating the csm with, the login page can be access via the URL just by keying in the ip address of the server.

Re: CSM loadbalancing

Gilles Dufour — Mon, 11 Jul 2005 07:47:09 GMT

if this is the same url on both server, it should be no problem.

Regards,

Gilles.