topic Re: content engine 565 - real server relay in Application Networking

content engine 565 - real server relay

dknoezinger — Tue, 12 Jul 2005 10:23:47 GMT

hi all,

we have a standalone content engine 565 running acns 5.3.1. we would like to realize something like a live stream 'relay':

we place the ce on the network edge and it receives a live stream (rtsp) directly from a content provider. the internal clients send their rtsp requests for that live stream directly to the ce which answers the requests. one important thing is that we cannot use a proxy configuration, because a proxy config on the client is not possible - meaning that we need to place requests directly (no direct or transparent proxy). in the real subscriber config interface I saw the receiver/transmitter section - is that the right way to go? where can I find config examples or documentation for that issue. on the cisco website I could not find any detailed documentation for real subscriber configs.

Re: content engine 565 - real server relay

pradeepde — Mon, 18 Jul 2005 14:25:39 GMT

I think the network setup that you have explained should work. Theoretically it looks good. You can go ahead and try implememting this setup.It will work.

Re: content engine 565 - real server relay

dknoezinger — Tue, 30 Aug 2005 14:40:48 GMT

thanks for the answer - i realized it rather late. can you help me in configuring this setup? as i said I cannot find any documentation support for such a setup...I would really appreciate any help.

thanks,

daniel

Re: content engine 565 - real server relay

ronald.change — Fri, 12 May 2006 19:56:18 GMT

Daniel,

Did you ever have any luck getting this configuration, or one doing the same but for WMT content, to work?

Any help would be appreciated,

Ron