topic Re: Radius and WAP Load Balancing with IOS SLB in Application Networking https://community.cisco.com/t5/application-networking/radius-and-wap-load-balancing-with-ios-slb/m-p/509454#M9604 <HTML><HEAD></HEAD><BODY><P>If you are running hybrid code and that is not supported. The CAT needs to be running Native IOS for SLB.</P><P></P></BODY></HTML> Fri, 07 Jul 2006 14:00:09 GMT fmeetz 2006-07-07T14:00:09Z Radius and WAP Load Balancing with IOS SLB https://community.cisco.com/t5/application-networking/radius-and-wap-load-balancing-with-ios-slb/m-p/509453#M9603 <P>Hello.</P><P>We have a WAP Gateway architecture with three groups of servers that contain, each, a serverfarm of Wap Gateways and one Radius server (the three groups share the same VIP). We need the following behaviour: the Radius traffic that comes from the client (that points a VIP) is sent to one of the three Radius servers (round-robin). Then, the WAP traffic (type 1 or 2, that is WSP or HTTP protocol), that also points a VIP, is balanced across the WAP GW Servers of the same group of that Radius server. Is this possible with IOS SLB and how? Thanks a lot. Alessandro</P> Mon, 03 Jul 2006 13:15:59 GMT https://community.cisco.com/t5/application-networking/radius-and-wap-load-balancing-with-ios-slb/m-p/509453#M9603 asepiacci 2006-07-03T13:15:59Z Re: Radius and WAP Load Balancing with IOS SLB https://community.cisco.com/t5/application-networking/radius-and-wap-load-balancing-with-ios-slb/m-p/509454#M9604 <HTML><HEAD></HEAD><BODY><P>If you are running hybrid code and that is not supported. The CAT needs to be running Native IOS for SLB.</P><P></P></BODY></HTML> Fri, 07 Jul 2006 14:00:09 GMT https://community.cisco.com/t5/application-networking/radius-and-wap-load-balancing-with-ios-slb/m-p/509454#M9604 fmeetz 2006-07-07T14:00:09Z