https://community.cisco.com/t5/network-management/system-error/m-p/2950004#M111178 <P></P> <P>It looks like a loading error. Can someone help explain this in more detail.&nbsp;</P> <P></P> <P>%SYS-4-CONFIG_RESOLVE_FAILURE: System config parse from (tftp://255.255.255.255/cprmc870-sleepctr-confg) failed</P> Thu, 21 Jul 2016 11:01:41 GMT henryabrams63 2016-07-21T11:01:41Z https://community.cisco.com/t5/network-management/system-error/m-p/2950004#M111178 <P></P> <P>It looks like a loading error. Can someone help explain this in more detail.&nbsp;</P> <P></P> <P>%SYS-4-CONFIG_RESOLVE_FAILURE: System config parse from (tftp://255.255.255.255/cprmc870-sleepctr-confg) failed</P> Thu, 21 Jul 2016 11:01:41 GMT https://community.cisco.com/t5/network-management/system-error/m-p/2950004#M111178 henryabrams63 2016-07-21T11:01:41Z https://community.cisco.com/t5/network-management/system-error/m-p/2950005#M111179 <P>Hi</P> <P>The messages reported are due to the auto install feature. To disable this configure the command "no service config" and save the configuration. with this command applied you should not see the messages anymore when booting.</P> <P></P> <P>This command is documented here:</P> <P><A href="http://www.cisco.com/en/US/docs/ios/fundamentals/command/reference/cf_r1.html#wp1076778" title="http://www.cisco.com/en/US/docs/ios/fundamentals/command/reference/cf_r1.html#wp1076778" target="_blank">http://www.cisco.com/en/US/docs/ios/fundamentals/command/reference/cf_r1.html#wp1076778</A></P> <P>Let me know if you have more questions.</P> <P></P> <P>If you see this information is helpful, Please let me know..</P> <P></P> <P>Thank you,</P> <P>-Prasad.</P> <P></P> Sun, 24 Jul 2016 01:26:37 GMT https://community.cisco.com/t5/network-management/system-error/m-p/2950005#M111179 prasadm 2016-07-24T01:26:37Z