topic CUCM Upgrade - 7.0(2a) to 8.0(3a)SU2? in IP Telephony and Phones

CUCM Upgrade - 7.0(2a) to 8.0(3a)SU2?

f.sorrentino — Sat, 16 Mar 2019 13:03:21 GMT

Hi,

I am looking to update the software revision on our CUCM Cluster. I am currently running on 7.0(2a) and would like to confirm if the highest direct revision I can get to is 8.0(3a)? Then as far as I can see from 8.0(3a) i can get up to 8.6(1a). I have not done a CUCM upgrade before so just want to be sure I am reading the tables right.

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/compat/ccmcompmatr.html#wp349495

Additionally, I am unsure of hardware requirements for the newer versions.

The current hardware is:

HW Platform : 7835H2

Processors : 1

Type : Intel(R) Xeon(R) CPU 5140 @ 2.33GHz

CPU Speed : 2333

Memory : 2048 MBytes

HDD :2x 146GB

I read on another post that more recent versions need 4GB of RAM, is that the case?

Thanks,

Franco

CUCM Upgrade - 7.0(2a) to 8.0(3a)SU2?

Gordon Ross — Thu, 21 Jul 2011 09:06:22 GMT

http://www.cisco.com/en/US/prod/collateral/voicesw/ps6790/ps5748/ps378/prod_brochure0900aecd8062a4f9.html is your friend.

GTG

CUCM Upgrade - 7.0(2a) to 8.0(3a)SU2?

f.sorrentino — Thu, 21 Jul 2011 10:08:57 GMT

Thanks Gordon,

Do you know with regards to upgrading the RAM, can I buy pretty much any make i.e. Corsair in order to upgrade it to 4Gb- as loong as it is "PC2-5300 667-MHz DDR2 synchronous dynamic RAM (SDRAM) Fully Buffered DIMMs"

Thanks,

CUCM Upgrade - 7.0(2a) to 8.0(3a)SU2?

Gordon Ross — Thu, 21 Jul 2011 10:53:05 GMT

I'm not sure about Cisco's official line on this, but I suspect:

- If your box is under hardware support by Cisco then you'll need to have genuine Cisco/HP memory in there.

- If you don't have maintenance on the box, do what you like.

GTG