topic Simulate calls in CUCM in IP Telephony and Phones

Simulate calls in CUCM

Robin Zhu — Sat, 16 Mar 2019 17:36:48 GMT

I want to do pressure test for UCCX. Can I simulate 300~400 calls to route point in CUCM?

CUCM 8.6.2

UCCX 8.5.1

Simulate calls in CUCM

Jaime Valencia — Thu, 12 Apr 2012 18:07:36 GMT

If you're asking if CUCM has built in some method to simulate calls for such purpose, no, it doesn't.

HTH

java

If this helps, please rate

www.cisco.com/go/pdihelpdesk

Simulate calls in CUCM

Robin Zhu — Thu, 12 Apr 2012 18:25:58 GMT

Hi Java:

Do you mind to advice if there're other methods like third-party tools, or I have to code script via JTAPI? thx.

Simulate calls in CUCM

anchoudh — Fri, 13 Apr 2012 10:58:51 GMT

Hi Robin,

For internal testing in Cisco we use Camelot tool for pumping calls through CUCM.

http://wwwin-vts.cisco.com/camelot/

Its an internal link for this tool.

I am not aware about the 3rd party tools for this purpose.

Hope it helps.

Anand

Please rate helpful posts !!

Simulate calls in CUCM

Sivakumar Shanmugam — Fri, 13 Apr 2012 11:28:30 GMT

Hello,

Honestly speaking , there is no built-in app which does this.Just curious to know the reason behind the testing.

Thanks

Siva

Simulate calls in CUCM

Robin Zhu — Fri, 13 Apr 2012 13:31:03 GMT

Hi Anand:

I cant open the link you attached. Is that for internal only? thx

Robin

Simulate calls in CUCM

anchoudh — Fri, 13 Apr 2012 15:41:20 GMT

Hi Robin,

Yes its an internal link.

Thanks,

Anand

Pls rate helpful posts !!

Simulate calls in CUCM

Robert Thomas — Fri, 13 Apr 2012 16:22:40 GMT

Best you can use is sipp, it's an opensource tool that can generate SIP and RTP traffic to fill the system with load.

Simulate calls in CUCM

laurent.flipo — Thu, 24 May 2012 07:44:55 GMT

Hello

... or you can use some commercial solution : http://www.spectra2.com

Laurent