Incoming call can't match incoming dial-peer

bo liu — Sun, 17 Mar 2019 11:38:12 GMT

i config the dial-peer like this

dial-peer voice 1007 pots
translation-profile incoming CallBack
call-block translation-profile incoming call_block
call-block disconnect-cause incoming call-reject
incoming called-number 843791...
fax rate disable
direct-inward-dial
!
dial-peer voice 1008 pots
translation-profile incoming CallBack
call-block translation-profile incoming call_block
call-block disconnect-cause incoming call-reject
incoming called-number 843792...
fax rate disable
direct-inward-dial

dial-peer voice 1006 pots
translation-profile incoming E1-incoming
call-block translation-profile incoming call_block
call-block disconnect-cause incoming call-reject
service csyw
incoming called-number 8437....
fax rate disable
direct-inward-dial
!

but when i dial a number 84379110,the call should match 1007 but it match 1006,why ????

.Oct 21 10:16:51.808: //-1/A039182898E2/CCAPI/cc_api_display_ie_subfields:
cc_api_call_setup_ind_common:
cisco-username=
----- ccCallInfo IE subfields -----
cisco-ani=13311173269
cisco-anitype=2
cisco-aniplan=1
cisco-anipi=0
cisco-anisi=3
dest=84379110
cisco-desttype=4
cisco-destplan=1
cisco-rdie=FFFFFFFF
cisco-rdn=
cisco-rdntype=-1
cisco-rdnplan=-1
cisco-rdnpi=-1
cisco-rdnsi=-1
cisco-redirectreason=-1 fwd_final_type =0
final_redirectNumber =
hunt_group_timeout =0
.Oct 21 10:16:51.808: //-1/A039182898E2/CCAPI/cc_api_call_setup_ind_common:
Interface=0x14FE6664, Call Info(
Calling Number=13311173269,(Calling Name=)(TON=National, NPI=ISDN, Screening=Network, Presentation=Allowed),
Called Number=84379110(TON=Subscriber, NPI=ISDN),
Calling Translated=FALSE, Subscriber Type Str=RegularLine, FinalDestinationFlag=TRUE,
Incoming Dial-peer=1006, Progress Indication=NULL(0), Calling IE Present=TRUE,
Source Trkgrp Route Label=, Target Trkgrp Route Label=, CLID Transparent=FALSE), Call Id=-1
.Oct 21 10:16:51.808: //-1/A039182898E2/CCAPI/ccCheckClipClir:
In: Calling Number=13311173269(TON=National, NPI=ISDN, Screening=Network, Presentation=Allowed)
.Oct 21 10:16:51.808: //-1/A039182898E2/CCAPI/ccCheckClipClir:
Out: Calling Number=13311173269(TON=National, NPI=ISDN, Screening=Network, Presentation=Allowed)
.Oct 21 10:16:51.808: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:

.Oct 21 10:16:51.808: :cc_get_feature_vsa malloc success
.Oct 21 10:16:51.808: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:

.Oct 21 10:16:51.808: cc_get_feature_vsa count is 226
.Oct 21 10:16:51.808: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:

.Oct 21 10:16:51.808: :FEATURE_VSA attributes are: feature_name:0,feature_time:369343064,feature_id:936110
.Oct 21 10:16:51.808: //1460499/A039182898E2/CCAPI/cc_api_call_setup_ind_common:
Set Up Event Sent;
Call Info(Calling Number=13311173269(TON=National, NPI=ISDN, Screening=Network, Presentation=Allowed),
Called Number=84379110(TON=Subscriber, NPI=ISDN))
.Oct 21 10:16:51.808: //1460499/A039182898E2/CCAPI/cc_process_call_setup_ind:
Event=0x245DBE0
.Oct 21 10:16:51.808: //-1/xxxxxxxxxxxx/CCAPI/cc_setupind_match_search:
Try with the demoted called number 84379110
.Oct 21 10:16:51.812: //1460499/A039182898E2/CCAPI/ccCallSetContext:
Context=0x133506C4
.Oct 21 10:16:51.812: //1460499/A039182898E2/CCAPI/cc_process_call_setup_ind:
>>>>CCAPI handed cid 1460499 with tag 1006 to app "_ManagedAppProcess_CSYW"
.Oct 21 10:16:52.008: //1460496/9FBDCD5298E1/CCAPI/ccCallSetupAck:

Hi.This because dialpeer is

Carlo Poggiarelli — Wed, 21 Oct 2015 02:48:43 GMT

Hi.

This because dialpeer is more specific for dialed number

On DP 1007 you have

incoming called-number 843791... ( 3 dots)

while on DP 1006 you have

incoming called-number 84379...

which is the best option for dialed number

Try to eliminate a dot from DP 1007 and it should be the best option

Let me know

HTH

Regards

Carlo

First of all, you having

Nadeem Ahmed — Wed, 21 Oct 2015 05:01:58 GMT

First of all, you having overlapping dial-peer which can cause this issue this is not at all recommended to configured in such way .either Set the preference or set inter-digit time out . also you apply the configuration as suggested carlo too.

br,
Nadeem

a ....sorry ....i mistake the

bo liu — Wed, 21 Oct 2015 05:57:32 GMT

a ....sorry ....i mistake

the right is 843791.. 2dot...

topic Incoming call can't match incoming dial-peer in IP Telephony and Phones

Incoming call can't match incoming dial-peer

Hi.This because dialpeer is

First of all, you having

a ....sorry ....i mistake the