topic Refer below: in IP Telephony and Phones

IP Phone BLF Presence and Jabber

Alex Rich — Sun, 17 Mar 2019 15:18:01 GMT

There is a slight chance I am crazy but one day 2 weeks ago I could have sworn all my BLF Presence indicators matched Jabber status. So people who were offline were gray, away orange, red presenting (I understand the orange and red could have been on a call and DND but this was not the case).

So my question is, is it possible to have BLF (or any other option) match a users jabber status?

Thanks,

Alex

Refer below:

Deepak Rawat — Fri, 07 Oct 2016 18:08:27 GMT

Refer below:

https://supportforums.cisco.com/document/12464776/cucm-native-presence-blf-speed-dial-novice

Regards

Deepak

Forgive me if I am a little

Alex Rich — Fri, 07 Oct 2016 18:36:37 GMT

Forgive me if I am a little slow here. To summarize no there is no way? The examples given there do not match our environment.

What all is mentioned in the

Deepak Rawat — Sat, 08 Oct 2016 17:13:10 GMT

What all is mentioned in the document is what you can get and that's it.

Regards

Deepak

Hi,

Aseem Anand — Sun, 09 Oct 2016 03:39:29 GMT

Hi,

I dont think it can be acheived. I tested it in my lab and only time BLF changes status for the Jabber is when Jabber user is on call. I tested it with Jabber in softphone mode.

Attached screenshots for your reference.

Aseem