topic Re: ISR4331-V/K9 Add Voicemail License in IP Telephony and Phones

ISR4331-V/K9 Add Voicemail License

omar Alqadi — Sun, 17 Mar 2019 19:49:43 GMT

Hi,

kindly, below is configuration for CME ISR4331-V/K , i faced in this configuration no i have voice mail License ,can you guide me how select Voice mail Licenses in this module.

ISR4331-V/K9	Cisco ISR 4331 UC Bundle, PVDM4-32, UC License, CUBEE10	1
CON-SNT-ISR4331V	SNTC-8X5XNBD Cisco ISR 4331 UC Bundle, PVDM4-32, UC L	1
MEM-FLSH-4U8G	4G to 8G eUSB Flash Memory Upgrade for Cisco ISR 4300	1
FL-CME-SRST-5	SRST-5 Seat License (CME uses CUCME Phone License ONLY)	2
PVDM4-32	32-channel DSP module	1
MEM-43-4G	4G DRAM (1 x 4G) for Cisco ISR 4300	1
FL-CUBEE-5	Unified Border Element Enterprise License - 5 sessions	2
FL-SRST	Cisco Survivable Remote Site Telephony (SRST) License	1
PWR-4330-AC	AC Power Supply for Cisco ISR 4330	1
CAB-ACU	AC Power Cord (UK), C13, BS 1363, 2.5m	1
SL-4330-UC-K9	Unified Communication License for Cisco ISR 4330 Series	1
SISR4300UK9-316S	Cisco ISR 4300 Series IOS XE Universal	1
SL-4330-IPB-K9	IP Base License for Cisco ISR 4330 Series	1
NIM-4FXO	4-port Network Interface Module - FXO (Universal)	1
SM-S-BLANK	Removable faceplate for SM slot on Cisco 2900,3900,4400 ISR	1
NETWORK-PNP-LIC	Network Plug-n-Play License for zero-touch device deployment	1
FL-UCSE-VS6-FND	UCS E-Series VMware ESXi 6 Foundation (with vCenter) License	1
CON-ECMU-FLUCSEVF	SWSS UPGRADES UCS E-Series VMware ESXi 6 Foundation (with vC	1
E100-SD-2G	2 GB SD Card for UCS-EN	1
E100N-SSD-50G	50 GB, mSATA SSD for NCE NIM	1
UCS-EN140N-M2/K9	UCS E-Series NCE, 4-core, 8GB RAM, 1 SSD, NIM	1
SW-UCSE-VM-6.0-K9	VMware Vsphere Hypervisor (ESXi) v6.0 software for UCS E	1

Regards

Omar

Re: ISR4331-V/K9 Add Voicemail License

Chris Deren — Wed, 16 May 2018 12:40:28 GMT

For ISR4K onboard voicemail you will need Unity Connection running on UCS E-blade, i.e SR-910 along with CUC licenses as there is no built in voicemail solution into the router like CME:

here is list of compatibility:

http://docwiki.cisco.com/wiki/Cisco_Unity_Connection_on_UCSE

and data sheet for E-blade:

https://www.cisco.com/c/en/us/products/collateral/routers/1900-series-integrated-services-routers-isr/data_sheet_c78-553913.html

Re: ISR4331-V/K9 Add Voicemail License

R0g22 — Wed, 16 May 2018 12:48:01 GMT

It depends upon what sort of a deployment. If you are trying to use CME and for a small to medium office/site, you might need Unity Express that can run on top ESXi on the UCS-E module that you have highlighted. Regarding the licenses, post 9.0.3 version, you don't need to buy port licenses. They are already there and set to platform maximum. You would need to worry about MBX and IVR sessions if you plan to use advanced IVR features like fax/email, database etc.

Re: ISR4331-V/K9 Add Voicemail License

omar Alqadi — Wed, 16 May 2018 14:11:03 GMT

thank you for reply.

i selected of configuration for L-CME-CUE as below Table:

is this configuration need more specification on configuration of ISR4331-V/K9:

Part Number	Part Description	Quantity
L-CME-CUE	Communication Manager Express (CME) - E-Delivery-Top Level	1
CME-UL	Cisco Communication Manager Express (CME) - 1 User License	4
CON-ECMU-CMEULCTG	SWSS UPGRADES Cisco Communication Manager Express (CME	4
CUE-VM	Cisco Unity Express (CUE) - 1 VMail License (E-Delivery RTU)	10
CON-ECMU-CUEGTVMV	SWSS UPGRADES Cisco Unity Express (CUE) - 1 VMail Lice	10
CUE-IVR	Cisco Unity Express (CUE) - 1 IVR License (E-Delivery RTU)	2
CON-ECMU-CUEIVRTB	SWSS UPGRADES Cisco Unity Express (CUE) - 1 IVR Licens	2

Regards

omar

Re: ISR4331-V/K9 Add Voicemail License

R0g22 — Wed, 16 May 2018 16:48:55 GMT

Looks good to me. You can let go of CUE-IVR if you only plan to use CUE for basic AA only functionality. Remember, out of the pool of available ports which like I said will be 20 or maximum for platform, every IVR session will consume 1 port which would leave less ports available to take VM, AA, user VM access calls.

Re: ISR4331-V/K9 Add Voicemail License

omar Alqadi — Wed, 16 May 2018 18:42:10 GMT

Thank you for your information

I'm confused Now ,

I'm looking for Cisco Call manager express supported the following :

1- 4 analog lines (PSTN )

2- 10 IP-Phones (basic models)

3- and necessary license for VM ,IVR,trunk ,EXT, etc.

Can you Please help me to do configuration for BOQ .

Regards

Re: ISR4331-V/K9 Add Voicemail License

R0g22 — Wed, 16 May 2018 20:20:58 GMT

I would suggest contacting a UC specialized Cisco Partner in your area. They can run a no cost BOM for you.

Re: ISR4331-V/K9 Add Voicemail License

omar Alqadi — Thu, 17 May 2018 08:07:21 GMT

Thank you

in ISR4331-V/K9 i think this item UCS-EN140N-M2/K9 Provide unity

but what is the next step for application and licenses can a add to system.

regards

Re: ISR4331-V/K9 Add Voicemail License

R0g22 — Thu, 17 May 2018 10:37:13 GMT

Yes that is the correct PID. These are meant for ISR-4k's only and you can have upto 2 of these modules on the same ISR4331 chassis.
Now, you would need to install ESXi through CIMC on this module and then run CUE or CUC as a virtual machine.
The following links should be helpful -

https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/unity_exp/rel9_0/install/cue_install_book/cue_virtual_support_for_esxi.html

https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/e/3-1-1/gs/guide/b_Getting_Started_Guide/b_3_x_Getting_Started_Guide_chapter_011.html

Re: ISR4331-V/K9 Add Voicemail License

Carlo Poggiarelli — Thu, 17 May 2018 16:03:04 GMT

Hi Omar,

Attached a recent BoM I created for one of my customers.

I removed the list price column, but with specified part numbers you can ask for e quote to your Cisco salse representative.

Let me know if it helps.

Regards

Carlo

Re: ISR4331-V/K9 Add Voicemail License

omar Alqadi — Thu, 17 May 2018 19:42:58 GMT

Thank you carlo , yes this what I need .

Thank all for support and replys