topic Unable to add CP-8800-Audio KEM to CUCM 9.1 in IP Telephony and Phones

Unable to add CP-8800-Audio KEM to CUCM 9.1

jonragnar — Mon, 18 Mar 2019 19:30:34 GMT

Hello

I have a customer running Callmanager 9.1.2-10000-28

I have installed the latest Device pack for that version.

We have a Cisco 8851 phone and 8800-Audio KEM 28 button, but i am unable to add that to the phone.

Only option is BEKEM 36 button module.

Please advise me

Re: Unable to add CP-8800-Audio KEM to CUCM 9.1

pieterh — Wed, 29 Aug 2018 12:32:29 GMT

Table 3. System Requirements
Phone Firmware/Call Control Server Release
Cisco IP Phone 8800 firmware 12.0.1.11 and later
Call-control compatibility Cisco Unified Communications Manager Version 10.5(2) and later;

Re: Unable to add CP-8800-Audio KEM to CUCM 9.1

Aman Soi — Wed, 29 Aug 2018 14:11:39 GMT

Hi ,

I was referring the below link which says

The Cisco IP Phone 8851/8861 Key Expansion Module and the Cisco IP Phone 8865 Key Expansion Module require firmware release 12.0(1) or later, and Cisco Unified Communications Manager 10.5(2) or later to function.

https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cuipph/7800-8800/english/accessories/p881_b_accessorie-guide-for-cisco-ip/p881_b_accessorie-guide-for-cisco-ip_chapter_01.html

regds,

aman

Re: Unable to add CP-8800-Audio KEM to CUCM 9.1

pieterh — Wed, 29 Aug 2018 14:20:02 GMT

Yes???

CUCM 9.1 -> you need to upgrade to CUCM 10.5(2) first!

Re: Unable to add CP-8800-Audio KEM to CUCM 9.1

jonragnar — Wed, 05 Sep 2018 09:20:03 GMT

I saw in other documents that 8800KEM was supported on 9.1.2

Thank you for confirming this with me :)