topic Re: enable web interface 8851-7811 in IP Telephony and Phones

enable web interface 8851-7811

frecamidolce — Sun, 11 Oct 2020 09:41:40 GMT

Please, hai need to configure my phone sip by web. But no work.

Tanks.

Re: enable web interface 8851-7811

Leo Laohoo — Sun, 11 Oct 2020 10:04:44 GMT

Are the phones loaded with 3PCC firmware or not?

Look at the back of the phone. Look at the "Model" of the phone if there is "3PCC" in it or not. If it is NOT loaded with 3PCC then you will need to convert the phone firmware from Enterprise to 3PCC -- for a fee.

Re: enable web interface 8851-7811

frecamidolce — Tue, 13 Oct 2020 06:24:42 GMT

I looked at the phone model and it is not 3PCC.

I not

What should i do?

Re: enable web interface 8851-7811

Nithin Eluvathingal — Tue, 13 Oct 2020 07:22:07 GMT

GO through below link.

https://www.cisco.com/c/en/us/products/collateral/collaboration-endpoints/unified-ip-phone-7800-series/guide-c07-742786.html

Re: enable web interface 8851-7811

Leo Laohoo — Tue, 13 Oct 2020 07:45:30 GMT

Am I correct to presume there is no CUCM?

Re: enable web interface 8851-7811

frecamidolce — Tue, 13 Oct 2020 08:34:49 GMT

I have CME version 12.0

the phones have cp-8851-k9 V11

the phones have cp-7811-k9 V05

Re: enable web interface 8851-7811

Nithin Eluvathingal — Tue, 13 Oct 2020 09:55:50 GMT

As per my knowledge configuring the SIP phones on CME is possible with CLI and not with WEB. for SCCP phones we can do that with CME GUI.

if you are looking for accessing the phone webpage

Please try the following:

telephony-service

service phone webAccess 0

voice register global

create profiles

apply-config