topic Re: What is the difference between sip and mpp firmwares of the ipphon in IP Telephony and Phones

What is the difference between sip and mpp firmwares of the ipphone?

luoketiantiantian — Mon, 19 Jun 2023 05:45:19 GMT

What is the difference between sip and mpp firmwares of the ipphone?
Which firmware should I download if I have one voice router or a voice server?

for example：
"Session Initiation Protocol (SIP) Software- 14.2(1)"
and
‘’IP Phone 8811 with Multiplatform Firmware"

Re: What is the difference between sip and mpp firmwares of the ipphon

Leo Laohoo — Mon, 19 Jun 2023 05:51:36 GMT

3PCC/MPP stands for 3rd Party Call Controller/Multi-Platform Phones. If the phones are going to be integrated with non-Cisco call controller, 3PCC/MPP firmware is recommended because configuring the phones will be easier using GUI.

Re: What is the difference between sip and mpp firmwares of the ipphon

Jonathan Schulenberg — Mon, 19 Jun 2023 09:23:50 GMT

MPP is also used with Webex Calling multi-tenant. The original firmware, now termed Enterprise, is intended solely for CUCM/CME.

Re: What is the difference between sip and mpp firmwares of the ipphon

Nithin Eluvathingal — Mon, 19 Jun 2023 11:12:28 GMT

If you are using a CME or CUCM as others mentioned the phone must run on Enterprise versions which will be SIP Firmware.

If you are planning to use it with third party solution like avaya, sip cloud providers etc.. it must be MPP.

You cannot convert the SIP firmware to MPP just like that. There is a process and License is also involved. You can learn more from this link.

https://www.cisco.com/c/en/us/products/collateral/collaboration-endpoints/unified-ip-phone-7800-series/guide-c07-742786.html

Re: What is the difference between sip and mpp firmwares of the ipphon

M02@rt37 — Mon, 19 Jun 2023 15:25:22 GMT

For me: https://www.cisco.com/c/en/us/products/collateral/collaboration-endpoints/unified-ip-phone-7800-series/guide-c07-742786.html

Re: What is the difference between sip and mpp firmwares of the ipphon

Jaime Valencia — Mon, 19 Jun 2023 15:07:23 GMT

MPP firmware is a firmware type introduced by Cisco to offer compatibility with multiple call control systems. It allows the IP phone to work with various call control platforms, including CUCM, Cisco Business Edition (BE), third-party SIP call control systems, or even voice routers acting as call control platforms. MPP firmware provides flexibility and interoperability for IP phones across different environments.

No, that is absolutely wrong. MPP/3PCC is NOT compatible with CUCM, BE is a flavor of CUCM, so also NOT compatible. You make it sound like MPP can be used for everything when that is not the case, the previous answers provided the correct information differentiating enterprise Vs MPP.

Re: What is the difference between sip and mpp firmwares of the ipphon

M02@rt37 — Mon, 19 Jun 2023 15:18:47 GMT

Thanks @Jaime Valencia for correct me.