IP Telephony and PhonesのトピックRe: TCL send DTMF after call connects

TCL send DTMF after call connects

rj.fetkovich — Wed, 23 Aug 2023 14:07:46 GMT

Hello,

I am currently working on a TCL script that when triggered on an incoming call, will play a greeting, then wait 1-2 seconds, and play a pre-defined DTMF sequence to the original inbound caller.

I have no problem having the script play that initial greeting on the call connecting, but can't seem to find/figure out a way to send/outpulse DTMF after the greeting.

Has anyone ever done this before, is there a way to do it within a TCL script?

Thanks,

Re: TCL send DTMF after call connects

Roger Kallberg — Wed, 23 Aug 2023 15:40:40 GMT

Possibly this is a question best asked over at DevNet as it’s related to development in a scripting language.

Re: TCL send DTMF after call connects

Roger Kallberg — Wed, 23 Aug 2023 15:50:42 GMT

Maybe this post could help you? https://community.cisco.com/t5/collaboration-knowledge-base/tcl-script-help-dialing-the-number-then-pause-then-dtmf-on-pri/ta-p/3628582

Re: TCL send DTMF after call connects

Roger Kallberg — Wed, 23 Aug 2023 15:53:48 GMT

Or this one? https://community.cisco.com/t5/call-control/tcl-dtmf-with-3rd-party-sip/td-p/4039175

Re: TCL send DTMF after call connects

rj.fetkovich — Wed, 23 Aug 2023 17:36:47 GMT

Thanks Roger,

I will take a look at those links and see if they provide any insight, I also posted the same question over on the DevNet side to see what that brings back.

Thanks,