https://community.cisco.com/t5/ip-telephony-and-phones/cisco-headset-561-training-shadow-mode/m-p/5024674#M414242 <P>Hello,</P><P>I have a 561 headset with the standard base connected to a CP-8841. I want to connect another headset to that base so it can listen in on an active call. This feature is mentioned on the 561 data sheet but instructions on doing so aren't clear. I've docked the second headset to the initial base, but the call audio does not come through.&nbsp;</P><P>&nbsp;</P><TABLE border="1" cellspacing="0" cellpadding="6"><TBODY><TR><TD><P class=""><STRONG>Conference/Training Mode</STRONG></P></TD><TD><P class="">Pair up to three additional headsets to the same base station for easy, comfortable training. Each headset will retain its own settings and will automatically be on mute when added.</P></TD></TR></TBODY></TABLE> Mon, 26 Feb 2024 20:17:59 GMT mjjessup25 2024-02-26T20:17:59Z https://community.cisco.com/t5/ip-telephony-and-phones/cisco-headset-561-training-shadow-mode/m-p/5024674#M414242 <P>Hello,</P><P>I have a 561 headset with the standard base connected to a CP-8841. I want to connect another headset to that base so it can listen in on an active call. This feature is mentioned on the 561 data sheet but instructions on doing so aren't clear. I've docked the second headset to the initial base, but the call audio does not come through.&nbsp;</P><P>&nbsp;</P><TABLE border="1" cellspacing="0" cellpadding="6"><TBODY><TR><TD><P class=""><STRONG>Conference/Training Mode</STRONG></P></TD><TD><P class="">Pair up to three additional headsets to the same base station for easy, comfortable training. Each headset will retain its own settings and will automatically be on mute when added.</P></TD></TR></TBODY></TABLE> Mon, 26 Feb 2024 20:17:59 GMT https://community.cisco.com/t5/ip-telephony-and-phones/cisco-headset-561-training-shadow-mode/m-p/5024674#M414242 mjjessup25 2024-02-26T20:17:59Z