https://community.cisco.com/t5/ip-telephony-and-phones/ata-191-max-ring-time/m-p/5024967#M414247 <P>Hi,</P> <P>All our ATA191 stop ringing after 60s and we get a reorder tone.</P> <P>An IP phone that is connected to the same shared line continues ringing.</P> <P>I could not find any parameter related to the maximum ring timer for ATA191.</P> <P>They are on SIP firmware and registered to our CUCM. There is no FNA configured on the CUCM, so they should keep ringing.</P> <P>I have upgraded them to the latest Firmware version <FONT color="darkblue">12-0-2-0001-011</FONT> but that did not change anything.</P> <P>Could someone shed some light?</P> <P>&nbsp;</P> <P>Thanks,</P> <P>Carlo</P> Tue, 27 Feb 2024 09:32:54 GMT carlo.fontaine@ascom.be 2024-02-27T09:32:54Z https://community.cisco.com/t5/ip-telephony-and-phones/ata-191-max-ring-time/m-p/5024967#M414247 <P>Hi,</P> <P>All our ATA191 stop ringing after 60s and we get a reorder tone.</P> <P>An IP phone that is connected to the same shared line continues ringing.</P> <P>I could not find any parameter related to the maximum ring timer for ATA191.</P> <P>They are on SIP firmware and registered to our CUCM. There is no FNA configured on the CUCM, so they should keep ringing.</P> <P>I have upgraded them to the latest Firmware version <FONT color="darkblue">12-0-2-0001-011</FONT> but that did not change anything.</P> <P>Could someone shed some light?</P> <P>&nbsp;</P> <P>Thanks,</P> <P>Carlo</P> Tue, 27 Feb 2024 09:32:54 GMT https://community.cisco.com/t5/ip-telephony-and-phones/ata-191-max-ring-time/m-p/5024967#M414247 carlo.fontaine@ascom.be 2024-02-27T09:32:54Z