topic Re: Adding 7911 to CCM 4.1.3 sr2 in IP Telephony and Phones

Adding 7911 to CCM 4.1.3 sr2

pharden — Fri, 15 Mar 2019 01:50:39 GMT

We just purchased 40 or so 7911 phones. I went to add code for Device Defaults and found no 7911 option. Programmed phone as 7912 and is regected. How do you add 7911 to 4.1.3?

Re: Adding 7911 to CCM 4.1.3 sr2

gogasca — Thu, 16 Nov 2006 15:06:54 GMT

You need to install a device package to have this device in you administration pages. You need to go to

http://www.cisco.com/cgi-bin/tablebuild.pl/callmgr-41 and download

"ciscocm.4-1-DevPack-28.2". I checked the readme for the device package

and the 7911 faq on CCO

(http://www.cisco.com/en/US/partner/products/hw/phones/ps379/products_qanda_item0900aecd8039de5e.shtml) and 4.1(3)SR1 is the minimum version required for CCM.

Re: Adding 7911 to CCM 4.1.3 sr2

pharden — Thu, 16 Nov 2006 15:23:35 GMT

I typed 7911 and CCM and many variaions under search and could not get this info to come up How did you find this info? If I may ask....

Phillip

Re: Adding 7911 to CCM 4.1.3 sr2

Rob Huffman — Fri, 17 Nov 2006 17:38:49 GMT

Hi Phillip,

Just thought I would throw this in, if you use something like "7911 release notes" you will come up with some good docs like this;

http://www.cisco.com/en/US/products/hw/phones/ps379/prod_release_note09186a00805b0439.html#wp1031083

Hope this helps in your future searches!

Rob