topic Re: Pri and Significant Digit in IP Telephony and Phones https://community.cisco.com/t5/ip-telephony-and-phones/pri-and-significant-digit/m-p/674506#M6048 <HTML><HEAD></HEAD><BODY><P>Are you trying to send an outbound call from phone 22XX out PRI#1 AND 23xx OUT pri#2 ?</P></BODY></HTML> Thu, 16 Nov 2006 21:43:51 GMT thisisshanky 2006-11-16T21:43:51Z Pri and Significant Digit https://community.cisco.com/t5/ip-telephony-and-phones/pri-and-significant-digit/m-p/674505#M6047 <P>I have a range of 200 DID numbers. 2200 thru 2399 I am programming Two PRI's how do I tell the first PRI to accept a call from 22XX and /or 23XX and visa versa for the second?</P> Fri, 15 Mar 2019 01:51:18 GMT https://community.cisco.com/t5/ip-telephony-and-phones/pri-and-significant-digit/m-p/674505#M6047 pharden 2019-03-15T01:51:18Z Re: Pri and Significant Digit https://community.cisco.com/t5/ip-telephony-and-phones/pri-and-significant-digit/m-p/674506#M6048 <HTML><HEAD></HEAD><BODY><P>Are you trying to send an outbound call from phone 22XX out PRI#1 AND 23xx OUT pri#2 ?</P></BODY></HTML> Thu, 16 Nov 2006 21:43:51 GMT https://community.cisco.com/t5/ip-telephony-and-phones/pri-and-significant-digit/m-p/674506#M6048 thisisshanky 2006-11-16T21:43:51Z Re: Pri and Significant Digit https://community.cisco.com/t5/ip-telephony-and-phones/pri-and-significant-digit/m-p/674507#M6049 <HTML><HEAD></HEAD><BODY><P>You cannot, inbound calls are controlled by the Telco, you need to let them know which PRI you want to associated the DID range with. Usually when you have 2 or more PRIs terminated at the same location you arrange Trunk group with the Telco where they send calls on both PRIs, depending which one has available ports.</P><P></P><P>HTH,</P><P></P><P>Chris</P></BODY></HTML> Thu, 16 Nov 2006 22:01:15 GMT https://community.cisco.com/t5/ip-telephony-and-phones/pri-and-significant-digit/m-p/674507#M6049 Chris Deren 2006-11-16T22:01:15Z