CISCO 5506 Error NAT-Exempt "% Invalid input detected at '^' marker."

Ls5467 — Sun, 03 Mar 2019 16:45:58 GMT

Hello,

i get the following error during creating a NAT-Exempt Rule for a VPN Connection.

[OK] crypto map outside_map interface outside

[ERROR] nat (inside,outside) 1 source static NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.1.0_24 destination static NETWORK_OBJ_192.168.10.0_24 NETWORK_OBJ_192.168.10.0_24 no-proxy-arp route-lookup

nat (inside,outside) 1 source static NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192. ^168.1.0_24 destination static NETWORK_OBJ_192.168.10.0_24 NETWORK_OBJ_192.168.10

.0_24 no-proxy-arp route-lookup

ERROR: % Invalid input detected at '^' marker.

Re: CISCO 5506 Error NAT-Exempt "% Invalid input detected at '^' marker."

Anton6 — Wed, 23 May 2018 09:39:09 GMT

Do you have a bridge group configured for your interfaces? NAT doesnt seem to like that.

topic Re: CISCO 5506 Error NAT-Exempt "% Invalid input detected at '^' marker." in Other Network Architecture Subjects

CISCO 5506 Error NAT-Exempt "% Invalid input detected at '^' marker."

Re: CISCO 5506 Error NAT-Exempt "% Invalid input detected at '^' marker."