topic Re: CiscoWorks 2000 error message in Other Network Architecture Subjects

CiscoWorks 2000 error message

datnguyen — Sat, 02 Mar 2019 04:31:01 GMT

I am getting multiple messages on couple of Catalyst 4000 switches. These messages show up on the CiscoWorks management station. Does anyone know what they mean?

InCharge Domain : DFM Switch 172.22.1.100 PerformanceException - System is experiencing Port or Interface performance problems.

InCharge Domain : DFM Switch 172.22.60.3 OperationalException - This system or the components of this system are not functioning

properly

thanks

DTN

Re: CiscoWorks 2000 error message

rmushtaq — Mon, 18 Feb 2002 03:09:08 GMT

Have you applied the DFM 1.1 IDS 1.1.1 patch from CCO?. This sound similar to CSCdu56631.

Re: CiscoWorks 2000 error message

nhabib — Wed, 20 Feb 2002 14:48:47 GMT

The DFM 1.1.1 IDS should take care of some of these

errors. However, you want to double-check the

PerformanceException as well. Double-click on the

alarm in the Monitoring Console to get more details.

Re: CiscoWorks 2000 error message

datnguyen — Wed, 20 Feb 2002 19:01:25 GMT

Thank you, I will check on the patch

Re: CiscoWorks 2000 error message

datnguyen — Wed, 20 Feb 2002 19:02:03 GMT

Thank you for the info.

Dat

Re: CiscoWorks 2000 error message

datnguyen — Mon, 25 Mar 2002 14:33:09 GMT

Rizwan,

Thanks for your previous suggestion. I applied the DFM 1.1 IDS 1.1.1 patch, the errors went away for couple of weeks, all of sudden, they appear again. Here are the message I am getting:

InCharge Domain : DFM Switch 172.22.41.31 OperationalException - This system or the components of this system are not functioning properly

InCharge Domain : DFM MSFC MSFC-172.22.41.1-16 OperationalException - This system or the components of this system are not functioning properly

It appears that all devices that are at remote sites are coming up with this errors. The devices at the main site, where the CW2000 and DFM PC is located, don't have these errors.

Can you think of anything else that could have cause this problem.

Thanks