topic Re: Dialup Router not accepting Incoming Calls in Routing and SD-WAN

Dialup Router not accepting Incoming Calls

hirmoge123_2 — Mon, 04 Mar 2019 14:01:41 GMT

I have cisco 3620 router which i want to use as a dialup router. after configuring it, the PRI link from telco is up but the problem i faced is that when i dial the PRI number which is 308888 i am getting busy tone. it seams the modem refuses the call. from the trace i took i am getting this cause ( Cause i = 0x80AC - Requested circuit/channel not available).

attachment is the result of the following commands:

sh ver

sh interface Serial1/0:15

sh controller E1 1/0

debug isdn q931

sh isdn service

sh isdn status

any help about this problem is highly appreciated.

Hassan

Re: Dialup Router not accepting Incoming Calls

paolo bevilacqua — Sat, 12 Sep 2009 12:30:26 GMT

Can you send "show diag" and "show run" ?

Re: Dialup Router not accepting Incoming Calls

hirmoge123_2 — Sat, 12 Sep 2009 12:51:59 GMT

I have attached

sh diag

sh run

Thanks

Re: Dialup Router not accepting Incoming Calls

paolo bevilacqua — Sat, 12 Sep 2009 13:12:21 GMT

Can you take some "show modem log" and "debug modem csm".

Re: Dialup Router not accepting Incoming Calls

hirmoge123_2 — Sun, 13 Sep 2009 09:00:02 GMT

I have attached both command results

sh modem log

debug modem csm

Thanks for your assistant

Re: Dialup Router not accepting Incoming Calls

paolo bevilacqua — Sun, 13 Sep 2009 09:20:54 GMT

Router can't find a free modem:

2d22h: CSM incall failed with dchan index=1, idb state=4, sb=0

2d22h: CSM: MODEM_REPORT rcvd DEV_INCALL for call_id 0x83, No modem available

Try upgrading IOS to latest available.

Re: Dialup Router not accepting Incoming Calls

hirmoge123_2 — Sun, 13 Sep 2009 09:48:50 GMT

thanks for your prompt and kind assistance

can you please advice me which version to upgrade.

Thanks

Re: Dialup Router not accepting Incoming Calls

paolo bevilacqua — Sun, 13 Sep 2009 11:28:34 GMT

12.3(26)

Also configure

line 1 30

modem In