topic Need help in configuring Soho 91 in Routing and SD-WAN

Need help in configuring Soho 91

BC1239800 — Mon, 04 Mar 2019 22:30:22 GMT

Hello,

I am relatively new to Cisco CLI and on the diagram that I am attaching I want the 2008 server to do DHCP for everything behind E0 on the Soho 91. I have tried multiple configs and I seem to get close but never quite get it. I am thinking that adding a DHCP helper on E0 will help but I am not sure. I am just looking for a fresh set of eyes on this and someone who actually knows what they are doing, unlike me

This is my current show run:

clock timezone akst -9

clock summer-time akdt recurring

no aaa new-model

ip subnet-zero

ip tcp path-mtu-discovery

no ip domain lookup

ip dhcp excluded-address 192.168.0.1

ip dhcp excluded-address 192.168.0.2

ip dhcp excluded-address 192.168.0.3 192.168.0.99

ip dhcp pool CLIENT

import all

network 192.168.0.0 255.255.255.248

default-router 192.168.0.3

lease 0 2

ip dhcp pool client

ip dhcp pool LAN

network 192.168.0.0 255.255.255.0

dns-server 192.168.0.2

default-router 192.168.0.3

ip cef

interface Ethernet0

description CUSTOMER LAN

ip address 192.168.0.3 255.255.255.0

ip nat inside

no cdp enable

hold-queue 32 in

interface Ethernet1

description WAN

ip address 192.168.2.1 255.255.255.252

ip nat inside

duplex auto

no cdp enable

router rip

redistribute connected

network 192.168.0.0

ip nat inside source list 102 interface Ethernet1 overload

ip classless

ip route 0.0.0.0 0.0.0.0 Ethernet0

no ip http server

no ip http secure-server

access-list 1 permit 192.168.0.0 0.0.0.255

access-list 23 permit 10.10.10.0 0.0.0.255

access-list 102 permit ip 10.10.10.0 0.0.0.255 any

dialer-list 1 protocol ip permit

no cdp run

line con 0

exec-timeout 120 0

no modem enable

stopbits 1

line aux 0

line vty 0 4

access-class 23 in

exec-timeout 120 0

password 7 150B390313073F7679

length 0

scheduler max-task-time 5000

End

Need help in configuring Soho 91

cadet alain — Sat, 03 Dec 2011 20:25:50 GMT

Hi,

if you want the DHCP server to be the Windows 2008 server then you must first delete the DHCP pools on the router

So get rid of all these lines :

ip dhcp excluded-address 192.168.0.1

ip dhcp excluded-address 192.168.0.2

ip dhcp excluded-address 192.168.0.3 192.168.0.99

ip dhcp pool CLIENT

import all

network 192.168.0.0 255.255.255.248

default-router 192.168.0.3

lease 0 2

ip dhcp pool client

ip dhcp pool LAN

network 192.168.0.0 255.255.255.0

dns-server 192.168.0.2

default-router 192.168.0.3

No need for any IP-helper address if the server is on the same subnet as the clients

Secondly: delete this route

ip route 0.0.0.0 0.0.0.0 Ethernet0 because your default route must point to your modem IP address

like this ip route 0.0.0.0 0.0.0.0 x.x.x.x where x.x.x.x is the modem IP address

If the modem is bridged then no need for any default route as you will receive it from ISP via DHCP.

3rd if you want E1 to get IP from DHCP:

interface ethernet1

ip address dhcp

Regards.

Alain

Need help in configuring Soho 91

BC1239800 — Mon, 12 Dec 2011 03:21:48 GMT

Alain, the suggestions that you made got me closer but I accidently erased my IOS and it has taken me a while to get it reloaded. I have a new config that I made that seems to be very close to what I want but it is not passing DHCP info from my server to devices behind the router. Can you take a look at this config and offer suggetstions?

Current configuration : 774 bytes

version 12.4

no service pad

service timestamps debug datetime msec

service timestamps log datetime msec

no service password-encryption

hostname Router

boot-start-marker

boot-end-marker

enable secret 5 **************

enable password ************

no aaa new-model

resource policy

no ip routing

no ip cef

interface Ethernet0

ip address 192.168.0.3 255.255.255.0

no ip route-cache

no cdp enable

interface Ethernet1

ip address dhcp

no ip route-cache

duplex auto

no cdp enable

ip http server

no ip http secure-server

control-plane

line con 0

exec-timeout 0 0

no modem enable

line aux 0

line vty 0 4

password y21

scheduler max-task-time 5000

no process cpu extended

no process cpu autoprofile hog

end

Router#show hosts

Default domain is acr.local

Name/address lookup uses domain service

Name servers are 192.168.0.2

Codes: UN - unknown, EX - expired, OK - OK, ?? - revalidate

temp - temporary, perm - permanent

NA - Not Applicable None - Not defined

Host Port Flags Age Type Address(es)

Router#show ip interface brief

Interface IP-Address OK? Method Status Prot

ocol

Ethernet0 192.168.0.3 YES NVRAM up up

Ethernet1 192.168.0.15 YES DHCP up up

Need help in configuring Soho 91

cadet alain — Mon, 12 Dec 2011 08:50:50 GMT

Hi,

interface Ethernet0

ip address 192.168.0.3 255.255.255.0 You can't give it this address as it is already the address of your Windows 2008 server

2) ethernet ports on the Soho 91 are switchports( Layer 2) so I even wonder how it accepted an ip address on these ports without changing them to L3 ports.

Anyway here is what I would do:

ip routing

interface eth1

switchport mode access

switchport access vlan 2

interface eth0

switchport mode access

switchport access vlan 1

interface vlan 2

ip address dhcp

interface vlan 1

ip address 192.168.0. x 255.255.255.0

sh ip int br | in Vlan to verify both Vlan interfaces are up/up and got an IP address.

then renew your lease on a client and if it is still unsuccessful, let us know.

Regards.

Alain