topic Re: Remote site Internet access over MPLS network in Routing and SD-WAN

Remote site Internet access over MPLS network

Haitham Elkot — Wed, 29 Aug 2018 17:25:02 GMT

i already connected all my HQ and branches with the ISP with a L3VPN connection , providing NAT at the HQ , all my branches get internet through the HQ ,, when I tracert to 8.8.8.8 (google) the packet gets to a hop (this hop related to a router at the core of the ISP routers ) and died, however all my internal network packets are routing just fine. What am I missing here?

Re: Remote site Internet access over MPLS network

Georg Pauwen — Wed, 29 Aug 2018 17:37:23 GMT

Hello,

it is unclear what you are asking: a traceroute to 8.8.8.8 dies...where ? Post the relevant configurations...

Re: Remote site Internet access over MPLS network

Haitham Elkot — Wed, 29 Aug 2018 17:52:13 GMT

a traceroute to 8.8.8.8 dies...where ? at the branch has the problem that i can`t access internet at it , also Note i have class of service and policer configuration for each branch at the HQ router . Unfortunately i didn`t have the config file now

Re: Remote site Internet access over MPLS network

Georg Pauwen — Wed, 29 Aug 2018 18:12:35 GMT

Hello,

at a minimum we need to know what kind of topology you have (e.g. DMVPN)...can no branch access the Internet or just one branch ?

Re: Remote site Internet access over MPLS network

Haitham Elkot — Wed, 29 Aug 2018 18:19:19 GMT

what kind of topology you have ? MPLS L3VPN connection between all my HQ , branches and the ISP network , this issue related only to one branch not all

Re: Remote site Internet access over MPLS network

Georg Pauwen — Wed, 29 Aug 2018 18:23:01 GMT

Do you have access to the branch, can you check e.g. BGP connectivity ?

Re: Remote site Internet access over MPLS network

Haitham Elkot — Wed, 29 Aug 2018 18:29:30 GMT

Do you have access to the branch ? Yes i have reliability between the HQ & the mentioned branch ,

for example as per attached L3VPN

Re: Remote site Internet access over MPLS network

Georg Pauwen — Wed, 29 Aug 2018 18:34:05 GMT

Are you using Juniper routers ? Either way, if you can access the branch, post the output of 'show ip route' and the running config...

Re: Remote site Internet access over MPLS network

Haitham Elkot — Wed, 29 Aug 2018 18:38:26 GMT

at my side Cisco Routers

Re: Remote site Internet access over MPLS network

Georg Pauwen — Wed, 29 Aug 2018 18:40:18 GMT

Compare the configuration of one of the working branches with the configuration of the branch that has no connectivity...