tema Re: Cisco Catalyst Switch syslog host configuration en Routing

Cisco Catalyst Switch syslog host configuration

zulkarnain — Wed, 03 Aug 2022 03:42:20 GMT

Hi All.

Is there a command for the logging host instead of using IP address, it's using URL?

Re: Cisco Catalyst Switch syslog host configuration

Leo Laohoo — Wed, 03 Aug 2022 03:46:44 GMT

logging origin-id hostname

Re: Cisco Catalyst Switch syslog host configuration

zulkarnain — Wed, 03 Aug 2022 04:11:51 GMT

Hi All.

When i configure the logging host <hostname>, it will show IP address inside the logging host show run instead of the <hostname> that i've just type. Any help on this to retain what i have just type in the show run config?

Re: Cisco Catalyst Switch syslog host configuration

zulkarnain — Wed, 03 Aug 2022 06:32:32 GMT

Hi Leo.

Thanks for the response. What I mean is when I add the config

conf t

logging host syslog.com

when I show run | inc logging

it will show me the IP address instead of syslog.com. How to get the show running with the syslog.com instead of the ip?

Re: Cisco Catalyst Switch syslog host configuration

marce1000 — Wed, 03 Aug 2022 06:40:45 GMT

> it will show me the IP address instead of syslog.com. How to get the show running with the syslog.com instead of the ip?

- You can't change that behavior , it is intended for the syslog server to get translated to an ip address and remain in place to provide a dedicated syslog server solution.

Re: Cisco Catalyst Switch syslog host configuration

Leo Laohoo — Wed, 03 Aug 2022 07:59:10 GMT

@zulkarnain wrote:
it will show me the IP address instead of syslog.com. How to get the show running with the syslog.com instead of the ip?

logging syslog.com

Re: Cisco Catalyst Switch syslog host configuration

zulkarnain — Wed, 03 Aug 2022 08:56:53 GMT

Hi Leo.

Here is the snapshot when I type the logging syslog.com. You can see that
when do sho run it will change the name into ip address.

*BGI_C2960X_Test(config)#do sho run | inc logglogging buffered 16000
informationallogging console criticallogging origin-id hostnameprivilege
exec level 3 show logging* All access is monitored and logged
** All access is monitored and logged
*BGI_C2960X_Test(config)#logging syslog.com
<>BGI_C2960X_Test(config)#do sho run | inc logglogging
buffered 16000 informationallogging console criticallogging origin-id
hostnamelogging host 51.15.44.109privilege exec level 3 show logging*
All access is monitored and logged ** All access is monitored
and logged *BGI_C2960X_Test(config)#*

How I want to get the show run also shows as syslog.com?