topic 857W IP Pim command not available in Routing

857W IP Pim command not available

wahezu — Mon, 04 Mar 2019 06:07:03 GMT

HI,

I don't know how to configure IGMP on one interface as the command "IP pim ..." is not available on routers 857w.

Can someone help with it?

Re: 857W IP Pim command not available

smahbub — Mon, 02 Jun 2008 17:39:42 GMT

Since 857 is an older device i think that it is not possible to configure IGMP on it.It is better to use an 4500 series switches to configure IGMP and use the same.

Refer the following url for more information:

http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/12.2/44sg/configuration/guide/multi.html

Re: 857W IP Pim command not available

wahezu — Tue, 03 Jun 2008 06:24:55 GMT

I want to join the internal vlan to IGMP groups for IPTV coming by the ATM interface.

Would it work using the a switch?

Thanks,

Juan.

Re: 857W IP Pim command not available

paolo bevilacqua — Tue, 03 Jun 2008 16:16:11 GMT

Hi, you can ignore random comment about switch es, anyway is correct to state that the 85x does not support pim like many other advance protocols, but this is a product limitation, not due to the 85x being old, as they are not.

You need a minimum of an 87x and possibly advanced IP service image to do that you're asking for.

Hope this helps, please rate post if it does!