topic Re: Unable to login UCS C220 CIMC in Unified Computing System Discussions

Unable to login UCS C220 CIMC

EYC — Fri, 01 Mar 2019 21:21:49 GMT

All,

I have a couple of UCS C220 M3S running on cimc v2.0(6d) that upon keying in the user id and password, there is a spinning wheel that takes at least 20-30 mins to login, I am guessing it is a flash update issue with modern browsers, but I have tried powering cycle the box including rebooting the CIMC, but it does not help. Any ideas?

Thanks.

Re: Unable to login UCS C220 CIMC

Leo Laohoo — Mon, 20 Nov 2017 05:41:22 GMT

Try a different machine with IE or Firefox.

Re: Unable to login UCS C220 CIMC

EYC — Tue, 21 Nov 2017 01:10:35 GMT

I tried Chrome, IE, Edge, Firefox, Safari, rebooted CIMC, rebooted the entire server and power down the whole server all didnt work.

Re: Unable to login UCS C220 CIMC

Wes Austin — Tue, 21 Nov 2017 01:21:38 GMT

Have you tried a different Java version?

I would try Java 7 if your on 2.0.6.

When you say power down, did you remove power to "reset" the CIMC?

Re: Unable to login UCS C220 CIMC

EYC — Tue, 21 Nov 2017 01:24:44 GMT

Yes the power was out as we have a power maintenance. Java 7 so it is not a Flash to login? Cisco should really either upgrade their coding to support Java 8 or rid of Java and flash altogether considering modern browsers are going away with both.

Re: Unable to login UCS C220 CIMC

Andrew West — Tue, 21 Nov 2017 21:29:59 GMT

From what I remember at CLUS HTML 5 is on the horizon for CIMC access.
Trying to find the session presentation where I saw that to validate it.

Re: Unable to login UCS C220 CIMC

EYC — Wed, 22 Nov 2017 00:23:23 GMT

Jave 6 dont work.

I am not knowing to do anything else. No one has the same problem?

Re: Unable to login UCS C220 CIMC

Andrew West — Wed, 22 Nov 2017 01:20:49 GMT

Do you have SecureBoot enabled on your CIMC?

Have you opened a TAC case?