topic Re: Cisco UCS B200 M3 Purple Screen Of Death in Unified Computing System Discussions

Cisco UCS B200 M3 Purple Screen Of Death

IamDaMayor — Fri, 01 Mar 2019 21:26:46 GMT

We have a Hardware fault with of the UCS blade’s Processors. UCS blade is unable to recover Purple screen of Death even after reboots. Once rebooted blades has crashed on below blank screen can’t go further than Selftest

Re: Cisco UCS B200 M3 Purple Screen Of Death

Wes Austin — Mon, 26 Feb 2018 13:51:05 GMT

Looks like you have a hardware problem. I would open a TAC case for diagnosis and RMA if required.

Re: Cisco UCS B200 M3 Purple Screen Of Death

IamDaMayor — Tue, 27 Feb 2018 09:53:01 GMT

Blade is NoT recognizing it's CPU's and not recovering crash state.

After PSOD, blade rebooted and it's going past the Self test, UCS manager is generating loads of error messages

Re: Cisco UCS B200 M3 Purple Screen Of Death

turgutates.can — Wed, 21 Mar 2018 12:27:20 GMT

Hello,

I had same problem 3 times.

It is mostly about Memory. If TAC engineer check all memory errors periodically, memory errors will be seen. That means, theese memories can cause PSOD problem. After replacing all of unhealthy memories, I haven't seen any PSOD for 3 months.

Best Regards.