topic Re: UCSM CLI output of inband management ip configuration in Unified Computing System Discussions

UCSM CLI output of inband management ip configuration

Dan Laden — Fri, 01 Mar 2019 21:28:09 GMT

When I look at the 'show configuration' output of the service profile on the CLI, i do not see the information of the inband configuration. Where would I see this from the CLI.

UCSM 3.2.2

Re: UCSM CLI output of inband management ip configuration

Wes Austin — Wed, 21 Mar 2018 21:31:51 GMT

You would scope to the service profile and run this command:

UCS-A# scope service-profile server 1/8

UCS-A /org/service-profile # show mgmt-iface in-band detail

Re: UCSM CLI output of inband management ip configuration

Dan Laden — Wed, 21 Mar 2018 21:44:48 GMT

This shows it is configured but no the explicit details that can be seen in the gui.

UCS3-A /org/service-profile # scope service-profile server 1/5
UCS3-A /org/service-profile # show config
enter service-profile HN1 instance
associate server 1/5
exit
UCS3-A /org/service-profile # show mgmt-iface in-band detail

External Management Interface:
Mode: In Band
Ip V4 State: Static
Ip V6 State: None
Is Derived from Inband Profile: No
UCS3-A /org/service-profile #

Re: UCSM CLI output of inband management ip configuration

Dan Laden — Wed, 21 Mar 2018 21:47:27 GMT

seems i needed the additional key word.

UCS3-A /org/service-profile # show mgmt-iface in-band detail expand

External Management Interface:
Mode: In Band
Ip V4 State: Static
Ip V6 State: None
Is Derived from Inband Profile: No

External Management Virtual LAN:
Network Name: vLan824
Id: 824

External Management Static IP:
IP Address: 192.168.128.3
Default Gateway: 192.168.128.1
Subnet: 255.255.240.0
Primary DNS IP: 0.0.0.0
Secondary DNS IP: 0.0.0.0
UCS3-A /org/service-profile #