无线讨论区中的主题 AP1815W系统AIR-AP1815-K9-ME-8-10-190-0.tar启动故障

AP1815W系统AIR-AP1815-K9-ME-8-10-190-0.tar启动故障

sufee — Sun, 27 Oct 2024 14:06:37 GMT

[ OK ] Started Cisco S10 boot service.
Starting Cisco nolan service...
Starting Cisco watchdog...
Starting Cisco nss service...
[ OK ] Started Cisco nolan service.
[ OK ] Started Cisco watchdog.
[ OK ] Started Cisco nss service.
[ OK ] Started Cisco pkg install service.
Starting Cisco S15platform...
Starting Cisco Kclick...
[ OK ] Started Cisco S15platform.
[ OK ] Started Cisco Kclick.
Starting Cisco Kclick...
Starting Cisco ME service...
Starting Cisco certificate create service...
[ OK ] Started Cisco ME service.
[ OK ] Started Cisco Kclick.
Starting Cisco S16platfomm...
Starting Cisco syslog service...
Starting rsyslog client...
[ OK ] Started Cisco S16platfomm.
[ OK ] Started Cisco syslog service.
[ OK ] Started rsyslog client.
Starting Cisco synclogd...
[ OK ] Started Cisco synclogd.
[ OK ] Started Cisco certificate create service.
[ OK ] Started Cisco Tam service.
Starting Cisco Tam service...
Starting Cisco certtime service...
[ OK ] Started Cisco certtime service.
[ OK ] Reached target System Initialization.
[ OK ] Reached target Paths.
[ OK ] Reached target Basic System.
Starting Clean Air daemon...
Starting Fast CGI daemon...
Starting Cisco brain service...
Starting RSYNC User Key Generation...
Starting Cisco rtd service...
Starting Cisco kexec...
Starting Cisco klogd...
Starting gRPC server daemon...
Starting BLE init service...
Starting WCPD process...
[ OK ] Started System Monitor service.
Starting System Monitor service...
Starting capwapd...
Starting AP Trace daemon...
[ OK ] Started Serial Getty on ttyS0.
Starting Serial Getty on ttyS0...
[ OK ] Reached target Login Prompts.
Starting Cisco led service...
[ OK ] Started NTP_PROC daemon.
Starting NTP_PROC daemon...
Starting Hostapd process...
Starting Cisco printkd...
[ OK ] Started Cisco kexec.
[ OK ] Started BLE init service.
[ OK ] Started Cisco led service.
[ OK ] Started Cisco klogd.
[ OK ] Started Cisco printkd.
[ OK ] Started Cisco rtd service.
[ OK ] Started Fast CGI daemon.
[ OK ] Started AP Trace daemon.
[ OK ] Started Hostapd process.
[ OK ] Started Cisco brain service.
[ OK ] Started RSYNC User Key Generation.
[ OK ] Reached target sshd-keygen.target.
Starting OpenSSH server daemon...
[ OK ] Started OpenSSH server daemon.
[*09/29/2023 03:20:49.2627] stile module dp init successfully
[*09/29/2023 03:20:49.2627] NBAR Label:BLD_POLARIS_DEV_LATEST_20200414_053707 Module timestamp: Sep 29 2023 at 02:55:14 User: ttaichol
[*09/29/2023 03:20:58.3426] Loading sha2...
[*09/29/2023 03:20:58.3517] Dumpping sha1...
[*09/29/2023 03:20:58.8344]
[*09/29/2023 03:20:58.8344] Click sched monitor: schedulers = 3
[*09/29/2023 03:20:59.6099] Loading MIC cert and key
[*09/29/2023 03:20:59.6190] Dumpping sha2...
[*09/29/2023 03:21:00.7613] Loading MIC cert and key
[*09/29/2023 03:21:35.9131] pid 4287's current affinity mask: f
[*09/29/2023 03:21:35.9131] pid 4287's new affinity mask: e
[*09/29/2023 03:21:36.8495] __mm_init_module
[*09/29/2023 03:21:38.6950] ol_ath_ahb_probe
[*09/29/2023 03:21:38.6951] ol_ath_ahb_probe: io resource start: 0xa000000, mem=0xc1000000
[*09/29/2023 03:21:38.6954]
[*09/29/2023 03:21:38.6955] __ol_ath_attach() Allocated scn bdcc04c0
[*09/29/2023 03:21:38.6955] ol_ath_ahb_configure: MSI addr: 0b006040, MSI base: 00000040
[*09/29/2023 03:21:38.7066]
[*09/29/2023 03:21:38.7066] ol_ath_ahb_configure : num_desired MSI set to 0
[*09/29/2023 03:21:38.7066]
[*09/29/2023 03:21:38.7067] Using Legacy Interrupt
[*09/29/2023 03:21:38.7067]
[*09/29/2023 03:21:38.7067] Waiting for target init
[*09/29/2023 03:21:38.7067]
[*09/29/2023 03:21:38.7067] Done waiting
[*09/29/2023 03:21:38.7099] ol_ath_attach interface_id 0
[*09/29/2023 03:21:38.7104] Chip id: 0xb, chip version: 0x1000000
[*09/29/2023 03:21:38.7109]
[*09/29/2023 03:21:38.7109] Target Version is 1000000
[*09/29/2023 03:21:38.7109]
[*09/29/2023 03:21:38.7109] Flash Download Address c0000
[*09/29/2023 03:21:38.7109] ol_transfer_bin_file: flash data file defined
[*09/29/2023 03:21:38.7110] ol_transfer_bin_file[3800] Get Caldata for wifi0.
[*09/29/2023 03:21:38.7111] __adf_os_fs_read[42], Open File /tmp/wifi0.caldata SUCCESS!!
[*09/29/2023 03:21:38.7111] file system magic:16914836
[*09/29/2023 03:21:38.7111] super blocksize:4096
[*09/29/2023 03:21:38.7111] inode 6805
[*09/29/2023 03:21:38.7111] file size:12064
[*09/29/2023 03:21:38.7112] qc98xx_verify_checksum: flash checksum passed: 0x4b34
[*09/29/2023 03:21:38.7113] ol_transfer_bin_file 3861: Download Flash data len 12064
[*09/29/2023 03:21:38.7332]
[*09/29/2023 03:21:38.7332] Board data initialized
[*09/29/2023 03:21:38.7336] Firmware loaded from user helper succesfully
[*09/29/2023 03:21:38.7548] ol_ath_download_firmware :First OTP download and Execute is good address:0x5800 return param 4660
[*09/29/2023 03:21:38.7548] ol_ath_download_firmware:##Board Id 22 , CHIP Id 0
[*09/29/2023 03:21:38.7549]
[*09/29/2023 03:21:38.7549] wifi0: Selecting board data file name boardData_Mallorca_WP_2G_neg_pwr.bin
[*09/29/2023 03:21:38.7550] ol_transfer_bin_file: Board Data File download to address=0xc0000 file name=IPQ4019/hw.1/boardData_Mallorca_WP_2G_neg_pwr.bin
[*09/29/2023 03:21:38.7552] Firmware loaded from user helper succesfully
[*09/29/2023 03:21:38.7756] Firmware loaded from user helper succesfully
[*09/29/2023 03:21:38.7911]
[*09/29/2023 03:21:38.7912] [Flash] : Ignore Module param
[*09/29/2023 03:21:38.7912] ol_ath_download_firmware : Second OTP download and Execute is good, param=0x0
[*09/29/2023 03:21:38.7918] Firmware loaded from user helper succesfully
[*09/29/2023 03:21:38.7927] Firmware loaded from user helper succesfully
[*09/29/2023 03:21:38.8016] ol_transfer_bin_file: Downloading firmware file: IPQ4019/hw.1/athwlan.bin
[*09/29/2023 03:21:38.8027] Firmware loaded from user helper succesfully
[*09/29/2023 03:21:40.0218]
[*09/29/2023 03:21:40.0218] ol_ath_copy_tgt_iram() iram read paddr: 0x980000 host paddr 0x87500000 Radio id 0
[*09/29/2023 03:21:40.1916] HTC Rx: insufficient length, got:4 expected =8
[*09/29/2023 03:21:40.1916] <---------Dumping 8 Bytes : BAD RX packet length ------>
[*09/29/2023 03:21:40.1916] [0]: 00 00 00 00 00 00 00 00
[*09/29/2023 03:21:40.1916] <------------------------------------------------->

User Access Verification
Username: [*09/29/2023 03:21:52.7609] watchdogd: reading file /click/wdog_helper/ap_monproc_kclick: No such file or directory
[*09/29/2023 03:21:52.7618]
[*09/29/2023 03:21:52.7618] !!!!! {watchdogd} reading /click/wdog_helper/ap_monproc_kclick failed [2]: No such file or directory
[*09/29/2023 03:21:52.7622]
[*09/29/2023 03:21:52.7622] !!!!! {watchdogd} Process kclick no heartbeat for 60s
[*09/29/2023 03:21:52.7639]
[*09/29/2023 03:21:52.7639] !!!!! {watchdogd} Process switchdrvr gone for 60s
[*09/29/2023 03:21:52.7645]
[*09/29/2023 03:21:52.7645] !!!!! {watchdogd} Process sxpd gone for 60s
[*09/29/2023 03:21:52.8338] watchdogd: reading file /tmp/brain_dump: No such file or directory
[*09/29/2023 03:21:52.8344] watchdogd: reading file /click/l2_l3_gateway/gateway_ip_addr: No such file or directory
[*09/29/2023 03:21:56.2745] device aptrace0 entered promiscuous mode
[*09/29/2023 03:21:56.3145] device to_container entered promiscuous mode
[*09/29/2023 03:22:00.4766] systemd[1]: Failed to start WCPD process.
[*09/29/2023 03:22:00.4768] systemd[1]: Dependency failed for Farallon Wireless Backhaul process.
[*09/29/2023 03:22:00.4777] systemd[1]: wcpd.service failed.
[*09/29/2023 03:22:00.8397] pid 4715's current affinity mask: f
[*09/29/2023 03:22:00.8397] pid 4715's new affinity mask: e
[*09/29/2023 03:22:00.8866] /bin/sh: can't create /proc/irq//smp_affinity: nonexistent directory
[*09/29/2023 03:22:00.8947] systemd[1]: Failed to start capwapd.
[*09/29/2023 03:22:00.8955] systemd[1]: capwapd.service failed.
[*09/29/2023 03:22:10.1976] netlink error
[*09/29/2023 03:22:10.1976] : Protocol not supported
[*09/29/2023 03:22:10.1978] netlink bind error
[*09/29/2023 03:22:10.1978] : Bad file descriptor
[*09/29/2023 03:22:10.1989] netlink socket init fail
[*09/29/2023 03:22:28.0383] systemd[1]: Failed to start WCPD process.
[*09/29/2023 03:22:28.0388] systemd[1]: wcpd.service failed.
[*09/29/2023 03:22:28.7286] pid 4890's current affinity mask: f
[*09/29/2023 03:22:28.7286] pid 4890's new affinity mask: e
[*09/29/2023 03:22:28.7752] /bin/sh: can't create /proc/irq//smp_affinity: nonexistent directory
[*09/29/2023 03:22:28.7829] systemd[1]: Failed to start capwapd.
[*09/29/2023 03:22:28.7834] systemd[1]: capwapd.service failed.
[*09/29/2023 03:22:51.9634] netlink error
[*09/29/2023 03:22:51.9634] : Protocol not supported
[*09/29/2023 03:22:51.9636] netlink bind error
[*09/29/2023 03:22:51.9636] : Bad file descriptor
[*09/29/2023 03:22:51.9648] netlink socket init fail
[*09/29/2023 03:22:55.5384] systemd[1]: Failed to start WCPD process.
[*09/29/2023 03:22:55.5389] systemd[1]: wcpd.service failed.
[*09/29/2023 03:22:56.4691] pid 5078's current affinity mask: f
[*09/29/2023 03:22:56.4691] pid 5078's new affinity mask: e
[*09/29/2023 03:22:56.5138] /bin/sh: can't create /proc/irq//smp_affinity: nonexistent directory
[*09/29/2023 03:22:56.5205] systemd[1]: Failed to start capwapd.
[*09/29/2023 03:22:56.5211] systemd[1]: capwapd.service failed.
[*09/29/2023 03:22:57.8879] watchdogd: reading file /click/wdog_helper/ap_monproc_kclick: No such file or directory
[*09/29/2023 03:22:57.8885]
[*09/29/2023 03:22:57.8885] !!!!! {watchdogd} reading /click/wdog_helper/ap_monproc_kclick failed [2]: No such file or directory
[*09/29/2023 03:22:57.8889]
[*09/29/2023 03:22:57.8889] !!!!! {watchdogd} Process kclick no heartbeat for 120s
[*09/29/2023 03:22:57.8907]
[*09/29/2023 03:22:57.8907] !!!!! {watchdogd} Process switchdrvr gone for 120s
[*09/29/2023 03:22:57.9532] watchdogd: reading file /tmp/brain_dump: No such file or directory
[*09/29/2023 03:22:57.9534] watchdogd: reading file /click/l2_l3_gateway/gateway_ip_addr: No such file or directory
[*09/29/2023 03:23:23.0623] systemd[1]: Failed to start WCPD process.
[*09/29/2023 03:23:23.0629] systemd[1]: wcpd.service failed.
[*09/29/2023 03:23:24.2639] pid 5316's current affinity mask: f
[*09/29/2023 03:23:24.2639] pid 5316's new affinity mask: e
[*09/29/2023 03:23:24.3093] /bin/sh: can't create /proc/irq//smp_affinity: nonexistent directory
[*09/29/2023 03:23:24.3172] systemd[1]: Failed to start capwapd.
[*09/29/2023 03:23:24.3177] systemd[1]: capwapd.service failed.
[*09/29/2023 03:23:33.7133] netlink error
[*09/29/2023 03:23:33.7133] : Protocol not supported
[*09/29/2023 03:23:33.7135] netlink bind error
[*09/29/2023 03:23:33.7135] : Bad file descriptor
[*09/29/2023 03:23:33.7146] netlink socket init fail
[*09/29/2023 03:23:50.5211] systemd[1]: Failed to start WCPD process.
[*09/29/2023 03:23:50.5218] systemd[1]: wcpd.service failed.
[*09/29/2023 03:23:51.6032] systemd[1]: start request repeated too quickly for wcpd.service
[*09/29/2023 03:23:51.6100] systemd[1]: Failed to start WCPD process.
[*09/29/2023 03:23:51.6102] systemd[1]: wcpd.service failed.
[*09/29/2023 03:23:51.6383]
[*09/29/2023 03:23:51.6384]
[*09/29/2023 03:23:51.6385] Critical process has crashed repeatedly, This will result in reboot of system
[*09/29/2023 03:23:51.6386] You have 20 seconds to run this to stop the reboot. Good luck
[*09/29/2023 03:23:51.6387]
[*09/29/2023 03:23:51.6387] freeze -w
[*09/29/2023 03:23:51.6388]
[*09/29/2023 03:23:51.9693] pid 5494's current affinity mask: f
[*09/29/2023 03:23:51.9693] pid 5494's new affinity mask: e
[*09/29/2023 03:23:52.0147] /bin/sh: can't create /proc/irq//smp_affinity: nonexistent directory
[*09/29/2023 03:23:52.0225] systemd[1]: Failed to start capwapd.
[*09/29/2023 03:23:52.0229] systemd[1]: capwapd.service failed.
[*09/29/2023 03:23:53.1031] systemd[1]: start request repeated too quickly for capwapd.service
[*09/29/2023 03:23:53.1075] systemd[1]: Failed to start capwapd.
[*09/29/2023 03:23:53.1078] systemd[1]: capwapd.service failed.
[*09/29/2023 03:24:03.0032] watchdogd: reading file /click/wdog_helper/ap_monproc_kclick: No such file or directory
[*09/29/2023 03:24:03.0037]
[*09/29/2023 03:24:03.0037] !!!!! {watchdogd} reading /click/wdog_helper/ap_monproc_kclick failed [2]: No such file or directory
[*09/29/2023 03:24:03.0041]
[*09/29/2023 03:24:03.0041] !!!!! {watchdogd} Process kclick no heartbeat for 180s
[*09/29/2023 03:24:03.0060]
[*09/29/2023 03:24:03.0060] !!!!! {watchdogd} Process switchdrvr gone for 180s
[*09/29/2023 03:24:03.0682] watchdogd: reading file /tmp/brain_dump: No such file or directory
[*09/29/2023 03:24:03.0685] watchdogd: reading file /click/l2_l3_gateway/gateway_ip_addr: No such file or directory
[ OK ] Stopped target Multi-User System.
Stopping Cisco led s[*09/29/2023 03:24:11.8025] /usr/bin/grpc-server.sh: line 76: can't create /click/host_grpc_server_enable/run: nonexistent directory
Stopping Clean Air daemon...
Stopping Cisco brain service...
Stopping System Monitor service...
Stopping OpenSSH server daemon...
[ OK ] Stopped Cisco klogd.
[ OK ] Stopped System Monitor service.
[ OK ] Stopped Serial Getty on ttyS0.
[ OK ] Stopped NTP_PROC daemon.
[ OK ] Stopped Cisco led service.
[ OK ] Stopped Cisco printkd.
[ OK ] Stopped Cisco rtd service.
[ OK ] Stopped Fast CGI daemon.
[ OK ] Stopped AP Trace daemon.
[ OK ] Stopped Hostapd process.
[ OK ] Stopped OpenSSH server daemon.
[ OK ] Stopped AP process failure for .
[ OK ] Stopped Clean Air daemon.
[ OK ] Stopped gRPC server daemon.
[ OK ] Stopped target sshd-keygen.target.
[ OK ] Removed slice system-serial\x2dgetty.slice.
[ *** ] A stop job is running for Cisco brain service (21s / 41s)[*09/29/2023 03:24:32.8490] systemd[1]: brain.service stop-final-sigterm timed out. Killing.
[ OK ] Stopped Cisco brain service.
[*09/29/2023 03:24:53.0990] systemd[1]: brain.service still around after final SIGKILL. Entering failed mode.
[ OK ] Stopped target Basic System.
[ OK ] Stopped target Slices.
[ OK ] Removed slice -.slice.
[ OK ] Stopped target Paths.
[ OK ] Stopped target System Initialization.
Stopping Cisco watchdog...
Stopping Cisco system time saving...
[*09/29/2023 03:24:53.2750] systemd[1]: brain.service failed.
[*09/29/2023 03:24:53.7064]
[*09/29/2023 03:24:53.7064] Writing reload timestamp (Fri Sep 29 03:24:53 UTC 2023) to disk
[*09/29/2023 03:24:53.7064]
Stopping Cisco nolan service...
Stopping Security Auditing Service...[09/29/2023 03:24:54.0299] audit_printk_skb: 63 callbacks suppressed

Stopping rsyslog client...
Stopping Cisco synclogd...
[ OK ] Stopped Cisco ME service.
Stopping Cisco ME service...
[ OK ] Stopped Cisco certtime service.
Stopping Cisco certtime service...
[ OK ] Stopped Cisco S16platfomm.
Stopping Cisco S16platfomm...
[ OK ] Stopped Cisco Tam service.
Stopping Cisco Tam service...
[ OK ] Stopped Cisco act2 check.
Stopping Cisco act2 check...
[ OK ] Stopped Cisco certificate create service.
Stopping Cisco certificate create service...
[ OK ] Stopped target Sockets.
[ OK ] Stopped Security Auditing Service.
[ OK ] Stopped Cisco watchdog.
[ OK ] Stopped rsyslog client.
[ OK ] Stopped Cisco synclogd.
[ OK ] Stopped Cisco system time saving.
[ OK ] Stopped Cisco nolan service.
Stopping Cisco syslog service...
[ OK ] Reached target Shutdown.

怎么修复系统文件

Board type: AP1815W
smem ram ptable found: ver: 1 len: 3

U-Boot 2012.07 (btldr release 56) (Jul 25 2023 - 15:43:25)

This product contains some software licensed under the
"GNU General Public License, version 2" provided with
ABSOLUTELY NO WARRANTY under the terms of
"GNU General Public License, version 2", available here:
http://www.gnu.org/licenses/old-licenses/gpl-2.0.html

DRAM: 1022 MiB
Nand: Detected ONFI Winbond NAND 256MiB 3,3V 8-bit
NAND ECC=1 ECC_THRESHOLD(NAND ECC-1)=0
SF: Detected MX25L3205D with page size 4 KiB, total 4 MiB
MFG data loaded
Scanning shenv data blocks
Total valid parts=4
Active shenv part[0:1], write_counter=26
machid: 8010001
Net: MAC0 addr:4:5f:b9:79:9b:90
PHY ID1: 0x4d
PHY ID2: 0xd0b1
ipq40xx_ess_sw_init done
Auto boot mode, use bootipq directly
Hit ESC key to stop autoboot: 0
(BTLDR) # ?
? - alias for 'help'
base - print or set address offset
bootipq - bootipq from flash device
chpart - change active partition
cmp - memory compare
cp - memory copy
crc32 - checksum calculation
dumpipq_data- dumpipq_data crashdump collection from memory
echo - echo args to console
env - environment handling commands
exit - exit script
false - do nothing, unsuccessfully
fdt - flattened device tree utility commands
fuseipq - fuse QFPROM registers from memory

help - print command description/usage
imxtract- extract a part of a multi-image
loop - infinite loop on address range
mii - MII utility commands
mtdparts- define flash/nand partitions
mtest - simple RAM read/write test
nand - NAND sub-system
pci - list and access PCI Configuration Space
ping - send ICMP ECHO_REQUEST to network host
printboardtype- print board type - EAP, WP, TW
printenv- print environment variables
printmfgenv- Print manufacture information data
printshenv- printshenv- print shared environment variables

reset - Perform RESET of the CPU
run - run commands in an environment variable
saveenv - save environment variables to persistent storage
saveshenv- saveshenv - save shared environment variables to persistent storage

setenv - set environment variables
setshenv- setshenv - set shared environment variables

sf - SPI flash sub-system
showvar - print local hushshell variables
smeminfo- print SMEM FLASH information
source - run script from memory
test - minimal test like /bin/sh
tftpboot- boot image via network using TFTP protocol
tftpput - TFTP put command, for uploading files to a server
true - do nothing, successfully
ubi - ubi commands
verify_bl- Cisco Bootloader signature verify
verify_lx- Cisco Image signature verify
version - print monitor, compiler and linker version
(BTLDR) #

回复： AP1815W系统AIR-AP1815-K9-ME-8-10-190-0.tar启动故障

Rps-Cheers — Mon, 28 Oct 2024 09:52:31 GMT

感觉没有看明白这个是问题还是什么。如果有问题，建议陈述一下目前面临的疑问和情况；另外就是做过什么操作？

看log输出，感觉是进入到了系统了的，但是后面又是BootLoader...

谢谢

回复： AP1815W系统AIR-AP1815-K9-ME-8-10-190-0.tar启动故障

sufee — Tue, 29 Oct 2024 02:13:24 GMT

machid: 8010001
Net: MAC0 addr:4:5f:b9:79:9b:90
PHY ID1: 0x4d
PHY ID2: 0xd0b1
ipq40xx_ess_sw_init done
Auto boot mode, use bootipq directly
Hit ESC key to stop autoboot: 0
Specified BOOT: part2

Booting from part2

Read 1024 bytes from volume part2 to 88000000
Read 62945116 bytes from volume part2 to 88000000
Signature returns 0
Image signing verification success, continue to run...
bootm 0x88000400
## Booting kernel from Legacy Image at 88000400 ...
## Loading init Ramdisk from multi component Legacy Image at 88000400 ...
## Flattened Device Tree from multi component Image at 88000400
Booting using the fdt at 0x8bbfdd44
Loading Ramdisk to 9c5fc000, end 9ffff6f2 ... OK
Loading Device Tree to 9c5ef000, end 9c5fb217 ... OK
no such device nand0
Using machid 0x8010001 from environment

Starting image ...

[01/01/1970 00:00:59.3199] Linux version 3.14.43 (aut@wnbu-bld-lnx9) (gcc version 4.7.1 (OpenWrt GCC 4.7.1 r48430) ) #1 SMP PREEMPT Fri Sep 29 02:46:10 GMT 2023
[01/01/1970 00:00:59.4799] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
[01/01/1970 00:00:59.5799] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[01/01/1970 00:00:59.6799] Machine model: Cisco 11ac Wave2 Wifi Access Point
[01/01/1970 00:00:59.7599] Memory policy: Data cache writealloc
[01/01/1970 00:00:59.8299] Kernel command line: console=ttyMSM0,9600n8 ubi.mtd=0 root=/dev/ram activepart=part2 activeboot=0 wdgtriggered=0 board_sku=3 clk_ignore_unused
[01/01/1970 00:01:00.0099] CPU1: Booted secondary processor
[01/01/1970 00:01:00.0699] CPU2: Booted secondary processor
[01/01/1970 00:01:00.1299] CPU3: Booted secondary processor
[01/01/1970 00:01:00.1999] buginf tty flushing thread started, ttyport=beadc000
[*01/01/1970 00:01:04.5858] buginf() enabled.
[*01/01/1970 00:01:04.6182] Made it into bootsh: Sep 29 2023 03:05:44 T-eea26d9aecddbce8a3d538e497d7baad0ab582d0-geea26d9a-aut
[01/01/1970 00:01:29.0199] audit_printk_skb: 117 callbacks suppressed
[01/01/1970 00:01:43.1999] audit_printk_skb: 51 callbacks suppressed

Welcome to Cisco.

Usage of this device is governed by Cisco's End User License Agreement,
available at:
http://www.cisco.com/c/en/us/td/docs/general/warranty/English/EU1KEN_.html.

Restricted Rights Legend

Use, duplication, or disclosure by the Government is subject to
restrictions as set forth in subparagraph (c) of the Commercial
Computer Software - Restricted Rights clause at FAR sec. 52.227-19 and
subparagraph (c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.

Cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706

This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

This product contains some software licensed under the
"GNU Library General Public License, version 2" provided
with ABSOLUTELY NO WARRANTY under the terms of "GNU Library
General Public License, version 2", available here:
http://www.gnu.org/licenses/old-licenses/lgpl-2.0.html

This product contains some software licensed under the
"GNU Lesser General Public License, version 2.1" provided
with ABSOLUTELY NO WARRANTY under the terms of "GNU Lesser
General Public License, version 2.1", available here:
http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html

This product contains some software licensed under the
"GNU General Public License, version 3" provided with
ABSOLUTELY NO WARRANTY under the terms of
"GNU General Public License, Version 3", available here:
http://www.gnu.org/licenses/gpl.html.

This product contains some software licensed under the
"GNU Affero General Public License, version 3" provided
with ABSOLUTELY NO WARRANTY under the terms of
"GNU Affero General Public License, version 3", available here:
http://www.gnu.org/licenses/agpl-3.0.html.

[*01/01/1970 00:01:43.6480] /init: ioctl(SIOCGIFHWADDR): wired0: No such device
[*01/01/1970 00:01:43.6574] /init: ioctl(SIOCGIFHWADDR): wired0: No such device
[*01/01/1970 00:01:43.7705] /init: ioctl(SIOCGIFHWADDR): wired0: No such device
[*01/01/1970 00:01:43.7797] /init: ioctl(SIOCGIFHWADDR): wired0: No such device
[ OK ] Reached target Cisco File Systems (Pre).
[ OK ] Reached target Timers.
[ OK ] Created slice -.slice.
[ OK ] Listening on Delayed Shutdown Socket.
[ OK ] Reached target Sockets.
[ OK ] Created slice system.slice.
[ OK ] Created slice system-sshd\x2dkeygen.slice.
[ OK ] Reached target Slices.
[ OK ] Created slice system-serial\x2dgetty.slice.
Starting Cisco UBIFS reformat/mount...
[ OK ] Started Cisco UBIFS reformat/mount.
Starting Cisco early mount...
[ OK ] Started Cisco early mount.
[ OK ] Reached target Local File Systems (Pre).
Starting Cisco seed generation...
Starting Cisco system time setup...
Starting Cisco fips check...
[*06/09/2020 23:59:59.0423] Last reload time: May 10 15:15:13 2024
[*05/10/2024 15:15:13.0010] Setting system time Fri May 10 15:15:13 UTC 2024
Starting Cisco platform file generation...
[*05/10/2024 15:15:13.2031] GCM-128 POST passed
[*05/10/2024 15:15:13.2032] GCM-256 POST passed
[ OK ] Started Cisco seed generation.
[ OK ] Started Cisco system time setup.
[ OK ] Started Cisco fips check.
[ OK ] Started Cisco platform file generation.
[ OK ] Reached target Local File Systems.
Starting Cisco S10 boot service...
Starting Cisco act2 check...
Starting Cisco pkg install service...
[ OK ] Started Cisco system time saving.
Starting Cisco system time saving...
Starting Security Auditing Service...
[*05/10/2024 15:15:14.0091] parameter passed without an option given
[ OK ] Started Cisco act2 check.
[ OK ] Started Security Auditing Service.
[* ] (1 of 2) A start job is running for...o pkg install service (8s / 33s)[05/10/2024 15:15:13.6899] ramoops: Unknown symbol encode_rs8 (err 0)
[05/10/2024 15:15:13.7499] ramoops: Unknown symbol decode_rs8 (err 0)
[05/10/2024 15:15:13.8299] ramoops: Unknown symbol init_rs (err 0)
[ OK ] Started Cisco S10 boot service.
Starting Cisco nolan service...
Starting Cisco watchdog...
Starting Cisco nss service...
[ OK ] Started Cisco nolan service.
[ OK ] Started Cisco watchdog.
[ OK ] Started Cisco nss service.
[ OK ] Started Cisco pkg install service.
Starting Cisco S15platform...
Starting Cisco Kclick...
[ OK ] Started Cisco S15platform.
[ OK ] Started Cisco Kclick.
Starting Cisco Kclick...
Starting Cisco ME service...
Starting Cisco certificate create service...
[ OK ] Started Cisco ME service.
[ OK ] Started Cisco Kclick.
Starting Cisco syslog service...
Starting rsyslog client...
Starting Cisco S16platfomm...
[ OK ] Started Cisco syslog service.
[ OK ] Started rsyslog client.
[*05/10/2024 15:15:14.4097] === 5G radio domain is 51, COPY 5G BDF files from non_ETSI_BDF folder ===
[*05/10/2024 15:15:14.4669] /etc/init.d/S10boot: Warning: deleting backup ap images to save storage...
[*05/10/2024 15:15:14.5016] 57
[*05/10/2024 15:15:14.7845] Active version: 8.10.190.0
[*05/10/2024 15:15:14.7930] Backup version: 8.5.182.7
[*05/10/2024 15:15:15.1600]
[*05/10/2024 15:15:15.1600] led pattern module start
[*05/10/2024 15:15:15.2169] Loading caldata from mtd2
[*05/10/2024 15:15:15.9320] ess-switch DT exist!
[*05/10/2024 15:15:15.9320] switchreg_base_addr: 0xc000000
[*05/10/2024 15:15:15.9321] switchreg_size: 0x80000
[*05/10/2024 15:15:15.9321] switch_access_mode: local bus
[*05/10/2024 15:15:15.9321] wan bmp:0x20
[*05/10/2024 15:15:15.9322] ess-psgmii DT exist!
[*05/10/2024 15:15:15.9322] mac mode=3
[*05/10/2024 15:15:15.9322] current mac mode = 0
[*05/10/2024 15:15:15.9322] current dts led_source_num is 5
[*05/10/2024 15:15:15.9323] mdio DT exist!
[*05/10/2024 15:15:15.9323] ssdk_plat_init start
[*05/10/2024 15:15:15.9326] enable ess clk
[*05/10/2024 15:15:16.0431] reset ok in probe!
[*05/10/2024 15:15:16.0444] PHY ID is 0x4dd0b1
[*05/10/2024 15:15:16.1061] qca probe malibu phy driver succeeded!
[*05/10/2024 15:15:17.9102] Dakota Chip version 0x1401
[*05/10/2024 15:15:17.9106]
[*05/10/2024 15:15:17.9106] Switch config for CPU switching done.
[*05/10/2024 15:15:17.9107]
[*05/10/2024 15:15:17.9107] QCA Switch config done - default in CPU switching.
[*05/10/2024 15:15:17.9119] qca-ssdk module init succeeded!
[*05/10/2024 15:15:17.9123]
[*05/10/2024 15:15:17.9123] Switch config for CPU switching done.
[*05/10/2024 15:15:17.9123]
[*05/10/2024 15:15:17.9123] QCA Switch config done - default in CPU switching.
[*05/10/2024 15:15:18.6382] crypto worker thread started
[*05/10/2024 15:15:18.6383] crypto worker thread started
[*05/10/2024 15:15:18.7686] pid 3316's current affinity mask: f
[*05/10/2024 15:15:18.7686] pid 3316's new affinity mask: e
[*05/10/2024 15:15:18.7771] pid 3315's current affinity mask: f
[*05/10/2024 15:15:18.7771] pid 3315's new affinity mask: e
[*05/10/2024 15:15:19.0375] Current value of FACTORY_RESET=0
[*06/09/2020 23:59:59.0371] Last reload time: May 10 15:15:13 2024
[*05/10/2024 15:15:13.0010] Setting system time Fri May 10 15:15:13 UTC 2024
[*05/10/2024 15:15:13.1259] device wired0 entered promiscuous mode
[*05/10/2024 15:15:14.4199] Last reload reason : 0: unknown
[*05/10/2024 15:15:18.2114] stile module dp init successfully
[*05/10/2024 15:15:18.2114] NBAR Label:BLD_POLARIS_DEV_LATEST_20200414_053707 Module timestamp: Sep 29 2023 at 02:55:14 User: ttaichol
[*05/10/2024 15:15:27.2920] Loading sha2...
[*05/10/2024 15:15:27.3012] Dumpping sha1...
[*05/10/2024 15:15:27.7861]
[*05/10/2024 15:15:27.7861] Click sched monitor: schedulers = 3
[*05/10/2024 15:15:28.5659] Loading MIC cert and key
[*05/10/2024 15:15:28.5745] Dumpping sha2...
[*05/10/2024 15:15:29.6918] Loading MIC cert and key
[ OK ] Started Cisco certificate create service.
[ OK ] Started Cisco S16platfomm.
Starting Cisco certtime service...
[ OK ] Started Cisco Tam service.
Starting Cisco Tam service...
Starting Cisco synclogd...
[ OK ] Started Cisco synclogd.
[ OK ] Started Cisco certtime service.
[ OK ] Reached target System Initialization.
[ OK ] Reached target Paths.
[ OK ] Reached target Basic System.
Starting Cisco printkd...
Starting Hostapd process...
Starting BLE init service...
Starting AP Trace daemon...
Starting capwapd...
[ OK ] Started Serial Getty on ttyS0.
Starting Serial Getty on ttyS0...
[ OK ] Reached target Login Prompts.
Starting WCPD process...
Starting Cisco klogd...
Starting Cisco kexec...
Starting Cisco brain service...
Starting Cisco rtd service...
Starting RSYNC User Key Generation...
Starting Clean Air daemon...
[ OK ] Started System Monitor service.
Starting System Monitor service...
Starting Cisco led service...
Starting Fast CGI daemon...
Starting gRPC server daemon...
[ OK ] Started NTP_PROC daemon.
Starting NTP_PROC daemon...
[ OK ] Started BLE init service.
[ OK ] Started Cisco kexec.
[ OK ] Started Cisco led service.
[ OK ] Started Cisco printkd.
[ OK ] Started Cisco klogd.
[ OK ] Started AP Trace daemon.
[ OK ] Started Cisco rtd service.
[ OK ] Started Fast CGI daemon.
[ OK ] Started Hostapd process.
[ OK ] Started Cisco brain service.
[*05/10/2024 15:16:06.5674] pid 4295's current affinity mask: f
[*05/10/2024 15:16:06.5674] pid 4295's new affinity mask: e
[*05/10/2024 15:16:07.3919] __mm_init_module
[*05/10/2024 15:16:09.2271] ol_ath_ahb_probe
[*05/10/2024 15:16:09.2272] ol_ath_ahb_probe: io resource start: 0xa000000, mem=0xc1000000
[*05/10/2024 15:16:09.2275]
[*05/10/2024 15:16:09.2276] __ol_ath_attach() Allocated scn aeac04c0
[*05/10/2024 15:16:09.2276] ol_ath_ahb_configure: MSI addr: 0b006040, MSI base: 00000040
[*05/10/2024 15:16:09.2379]
[*05/10/2024 15:16:09.2379] ol_ath_ahb_configure : num_desired MSI set to 0
[*05/10/2024 15:16:09.2379]
[*05/10/2024 15:16:09.2380] Using Legacy Interrupt
[*05/10/2024 15:16:09.2380]
[*05/10/2024 15:16:09.2380] Waiting for target init
[*05/10/2024 15:16:09.2380]
[*05/10/2024 15:16:09.2380] Done waiting
[*05/10/2024 15:16:09.2413] ol_ath_attach interface_id 0
[*05/10/2024 15:16:09.2416] Chip id: 0xb, chip version: 0x1000000
[*05/10/2024 15:16:09.2421]
[*05/10/2024 15:16:09.2421] Target Version is 1000000
[*05/10/2024 15:16:09.2421]
[*05/10/2024 15:16:09.2421] Flash Download Address c0000
[*05/10/2024 15:16:09.2422] ol_transfer_bin_file: flash data file defined
[*05/10/2024 15:16:09.2422] ol_transfer_bin_file[3800] Get Caldata for wifi0.
[*05/10/2024 15:16:09.2422] __adf_os_fs_read[42], Open File /tmp/wifi0.caldata SUCCESS!!
[*05/10/2024 15:16:09.2423] file system magic:16914836
[*05/10/2024 15:16:09.2423] super blocksize:4096
[*05/10/2024 15:16:09.2423] inode 7113
[*05/10/2024 15:16:09.2423] file size:12064
[*05/10/2024 15:16:09.2424] qc98xx_verify_checksum: flash checksum passed: 0x4b34
[*05/10/2024 15:16:09.2424] ol_transfer_bin_file 3861: Download Flash data len 12064
[*05/10/2024 15:16:09.2662]
[*05/10/2024 15:16:09.2662] Board data initialized
[*05/10/2024 15:16:09.2666] Firmware loaded from user helper succesfully
[*05/10/2024 15:16:09.2869] ol_ath_download_firmware :First OTP download and Execute is good address:0x5800 return param 4660
[*05/10/2024 15:16:09.2869] ol_ath_download_firmware:##Board Id 22 , CHIP Id 0
[*05/10/2024 15:16:09.2871]
[*05/10/2024 15:16:09.2871] wifi0: Selecting board data file name boardData_Mallorca_WP_2G_neg_pwr.bin
[*05/10/2024 15:16:09.2871] ol_transfer_bin_file: Board Data File download to address=0xc0000 file name=IPQ4019/hw.1/boardData_Mallorca_WP_2G_neg_pwr.bin
[*05/10/2024 15:16:09.2873] Firmware loaded from user helper succesfully
[*05/10/2024 15:16:09.3087] Firmware loaded from user helper succesfully
[*05/10/2024 15:16:09.3243]
[*05/10/2024 15:16:09.3243] [Flash] : Ignore Module param
[*05/10/2024 15:16:09.3244] ol_ath_download_firmware : Second OTP download and Execute is good, param=0x0
[*05/10/2024 15:16:09.3250] Firmware loaded from user helper succesfully
[*05/10/2024 15:16:09.3258] Firmware loaded from user helper succesfully
[*05/10/2024 15:16:09.3347] ol_transfer_bin_file: Downloading firmware file: IPQ4019/hw.1/athwlan.bin
[*05/10/2024 15:16:09.3357] Firmware loaded from user helper succesfully
[*05/10/2024 15:16:10.5770]
[*05/10/2024 15:16:10.5771] ol_ath_copy_tgt_iram() iram read paddr: 0x980000 host paddr 0x87500000 Radio id 0
[*05/10/2024 15:16:10.7477] HTC Rx: insufficient length, got:4 expected =8
[*05/10/2024 15:16:10.7478] <---------Dumping 8 Bytes : BAD RX packet length ------>
[*05/10/2024 15:16:10.7478] [0]: 00 00 00 00 00 00 00 00
[*05/10/2024 15:16:10.7479] <------------------------------------------------->

User Access Verification
Username: [*05/10/2024 15:16:19.6505] watchdogd: reading file /click/wdog_helper/ap_monproc_kclick: No such file or directory
[*05/10/2024 15:16:19.6514]
[*05/10/2024 15:16:19.6514] !!!!! {watchdogd} reading /click/wdog_helper/ap_monproc_kclick failed [2]: No such file or directory
[*05/10/2024 15:16:19.6518]
[*05/10/2024 15:16:19.6518] !!!!! {watchdogd} Process kclick no heartbeat for 60s
[*05/10/2024 15:16:19.6536]
[*05/10/2024 15:16:19.6536] !!!!! {watchdogd} Process switchdrvr gone for 60s
[*05/10/2024 15:16:19.6540]
[*05/10/2024 15:16:19.6540] !!!!! {watchdogd} Process sxpd gone for 60s
[*05/10/2024 15:16:19.7231] watchdogd: reading file /tmp/brain_dump: No such file or directory
[*05/10/2024 15:16:19.7237] watchdogd: reading file /click/l2_l3_gateway/gateway_ip_addr: No such file or directory
[*05/10/2024 15:16:27.4863] device aptrace0 entered promiscuous mode
[*05/10/2024 15:16:27.5362] device to_container entered promiscuous mode
[*05/10/2024 15:16:30.9635] pid 4698's current affinity mask: f
[*05/10/2024 15:16:30.9636] pid 4698's new affinity mask: e
[*05/10/2024 15:16:30.9990] systemd[1]: Failed to start WCPD process.
[*05/10/2024 15:16:30.9993] systemd[1]: Dependency failed for Farallon Wireless Backhaul process.
[*05/10/2024 15:16:31.0001] systemd[1]: wcpd.service failed.
[*05/10/2024 15:16:31.0152] /bin/sh: can't create /proc/irq//smp_affinity: nonexistent directory
[*05/10/2024 15:16:31.0224] systemd[1]: Failed to start capwapd.
[*05/10/2024 15:16:31.0229] systemd[1]: capwapd.service failed.
[*05/10/2024 15:16:41.4656] netlink error
[*05/10/2024 15:16:41.4657] : Protocol not supported
[*05/10/2024 15:16:41.4659] netlink bind error
[*05/10/2024 15:16:41.4659] : Bad file descriptor
[*05/10/2024 15:16:41.4671] netlink socket init fail
[*05/10/2024 15:16:58.4868] systemd[1]: Failed to start WCPD process.
[*05/10/2024 15:16:58.4873] systemd[1]: wcpd.service failed.
[*05/10/2024 15:16:58.6792] pid 4885's current affinity mask: f
[*05/10/2024 15:16:58.6792] pid 4885's new affinity mask: e
[*05/10/2024 15:16:58.7251] /bin/sh: can't create /proc/irq//smp_affinity: nonexistent directory
[*05/10/2024 15:16:58.7321] systemd[1]: Failed to start capwapd.
[*05/10/2024 15:16:58.7326] systemd[1]: capwapd.service failed.
[*05/10/2024 15:17:23.1788] netlink error
[*05/10/2024 15:17:23.1789] : Protocol not supported
[*05/10/2024 15:17:23.1791] netlink bind error
[*05/10/2024 15:17:23.1791] : Bad file descriptor
[*05/10/2024 15:17:23.1803] netlink socket init fail
[*05/10/2024 15:17:24.7769] watchdogd: reading file /click/wdog_helper/ap_monproc_kclick: No such file or directory
[*05/10/2024 15:17:24.7774]
[*05/10/2024 15:17:24.7774] !!!!! {watchdogd} reading /click/wdog_helper/ap_monproc_kclick failed [2]: No such file or directory
[*05/10/2024 15:17:24.7778]
[*05/10/2024 15:17:24.7778] !!!!! {watchdogd} Process kclick no heartbeat for 120s
[*05/10/2024 15:17:24.7795]
[*05/10/2024 15:17:24.7795] !!!!! {watchdogd} Process switchdrvr gone for 120s
[*05/10/2024 15:17:24.8416] watchdogd: reading file /tmp/brain_dump: No such file or directory
[*05/10/2024 15:17:24.8419] watchdogd: reading file /click/l2_l3_gateway/gateway_ip_addr: No such file or directory
[*05/10/2024 15:17:25.9725] systemd[1]: Failed to start WCPD process.
[*05/10/2024 15:17:25.9734] systemd[1]: wcpd.service failed.
[*05/10/2024 15:17:26.4148] pid 5105's current affinity mask: f
[*05/10/2024 15:17:26.4148] pid 5105's new affinity mask: e
[*05/10/2024 15:17:26.4624] /bin/sh: can't create /proc/irq//smp_affinity: nonexistent directory
[*05/10/2024 15:17:26.4692] systemd[1]: Failed to start capwapd.
[*05/10/2024 15:17:26.4699] systemd[1]: capwapd.service failed.
[*05/10/2024 15:17:53.4764] systemd[1]: Failed to start WCPD process.
[*05/10/2024 15:17:53.4769] systemd[1]: wcpd.service failed.
[*05/10/2024 15:17:54.1622] pid 5299's current affinity mask: f
[*05/10/2024 15:17:54.1622] pid 5299's new affinity mask: e
[*05/10/2024 15:17:54.2066] /bin/sh: can't create /proc/irq//smp_affinity: nonexistent directory
[*05/10/2024 15:17:54.2133] systemd[1]: Failed to start capwapd.
[*05/10/2024 15:17:54.2139] systemd[1]: capwapd.service failed.
[*05/10/2024 15:18:04.8972] netlink error
[*05/10/2024 15:18:04.8972] : Protocol not supported
[*05/10/2024 15:18:04.8974] netlink bind error
[*05/10/2024 15:18:04.8974] : Bad file descriptor
[*05/10/2024 15:18:04.8985] netlink socket init fail
[*05/10/2024 15:18:20.9731] systemd[1]: Failed to start WCPD process.
[*05/10/2024 15:18:20.9737] systemd[1]: wcpd.service failed.
[*05/10/2024 15:18:21.9099] pid 5487's current affinity mask: f
[*05/10/2024 15:18:21.9099] pid 5487's new affinity mask: e
[*05/10/2024 15:18:21.9561] /bin/sh: can't create /proc/irq//smp_affinity: nonexistent directory
[*05/10/2024 15:18:21.9641] systemd[1]: Failed to start capwapd.
[*05/10/2024 15:18:21.9651] systemd[1]: capwapd.service failed.
[*05/10/2024 15:18:22.0407] systemd[1]: start request repeated too quickly for wcpd.service
[*05/10/2024 15:18:22.0471] systemd[1]: Failed to start WCPD process.
[*05/10/2024 15:18:22.0473] systemd[1]: wcpd.service failed.
[*05/10/2024 15:18:22.0768]
[*05/10/2024 15:18:22.0768]
[*05/10/2024 15:18:22.0769] Critical process has crashed repeatedly, This will result in reboot of system
[*05/10/2024 15:18:22.0770] You have 20 seconds to run this to stop the reboot. Good luck
[*05/10/2024 15:18:22.0770]
[*05/10/2024 15:18:22.0771] freeze -w
[*05/10/2024 15:18:22.0771]
[*05/10/2024 15:18:23.0403] systemd[1]: start request repeated too quickly for capwapd.service
[*05/10/2024 15:18:23.0438] systemd[1]: Failed to start capwapd.
[*05/10/2024 15:18:23.0440] systemd[1]: capwapd.service failed.
[*05/10/2024 15:18:29.8912] watchdogd: reading file /click/wdog_helper/ap_monproc_kclick: No such file or directory
[*05/10/2024 15:18:29.8917]
[*05/10/2024 15:18:29.8917] !!!!! {watchdogd} reading /click/wdog_helper/ap_monproc_kclick failed [2]: No such file or directory
[*05/10/2024 15:18:29.8920]
[*05/10/2024 15:18:29.8921] !!!!! {watchdogd} Process kclick no heartbeat for 180s
[*05/10/2024 15:18:29.8937]
[*05/10/2024 15:18:29.8937] !!!!! {watchdogd} Process switchdrvr gone for 180s
[*05/10/2024 15:18:29.9567] watchdogd: reading file /tmp/brain_dump: No such file or directory
[*05/10/2024 15:18:29.9569] watchdogd: reading file /click/l2_l3_gateway/gateway_ip_addr: No such file or directory
[ OK ] Stopped target Multi-User System.
Stopping Serial Getty on ttyS0...
Stopping AP Trace daemon...
Stopping System Monitor service...
Stopping Cisco led service...
Stopping Clean Air daemon...
[ OK ] Stopped Cisco printkd.
[ OK ] Stopped Serial Getty on ttyS0.
[ OK ] Stopped Cisco klogd.
[ OK ] Stopped System Monitor service.
[ OK ] Stopped NTP_PROC daemon.
[ OK ] Stopped Cisco led service.
[ OK ] Stopped Hostapd process.
[ OK ] Stopped AP Trace daemon.
[ OK ] Stopped Cisco rtd service.
[ OK ] Stopped Fast CGI daemon.
[ OK ] Stopped OpenSSH server daemon.
[ OK ] Stopped AP process failure for .
[ OK ] Stopped Clean Air daemon.
[ OK ] Stopped gRPC server daemon.
[ OK ] Stopped target sshd-keygen.target.
[ OK ] Removed slice system-serial\x2dgetty.slice.
[ OK ] Stopped Cisco brain service.
[ OK ] Stopped target Basic System.
[ OK ] Stopped target Paths.
[ OK ] Stopped target System Initialization.
Stopping rsyslog client...
[ OK ] Stopped Cisco S16platfomm.
Stopping Cisco S16platfomm...
Stopping Cisco synclogd...
Stopping Cisco nolan service...
Stopping Cisco watchdog...
[*05/10/2024 15:19:03.2853] systemd[1]: brain.service stop-final-sigterm timed out. Killing.
[*05/10/2024 15:19:23.5353] systemd[1]: brain.service still around after final SIGKILL. Entering failed mode.
[*05/10/2024 15:19:23.5970] systemd[1]: brain.service failed.
[ OK ] Stopped Cisco Tam service.
Stopping Cisco Tam service...
[ OK ] Stopped Cisco act2 check.
Stopping Cisco act2 check...
[ OK ] Stopped Cisco certtime service.
Stopping Cisco certtime service...
[ OK ] Stopped Cisco certificate create service.
Stopping Cisco certificate create service...
[ OK ] Stopped Cisco ME service.
Stopping Cisco ME service...
Stopping Cisco system time saving...
[*05/10/2024 15:19:24.4871] systemd[1]: tam.service failed.
[*05/10/2024 15:19:25.0482]
[*05/10/2024 15:19:25.0482] Writing reload timestamp (Fri May 10 15:19:25 UTC 2024) to disk
[*05/10/2024 15:19:25.0482]
Stopping Security Auditing Service...[05/10/2024 15:19:25.3199] audit_printk_skb: 63 callbacks suppressed

[ OK ] Stopped target Sockets.
[ OK ] Stopped target Slices.
[ OK ] Stopped Security Auditing Service.
[ OK ] Stopped Cisco watchdog.
[ OK ] Stopped rsyslog client.
[ OK ] Stopped Cisco synclogd.
[ OK ] Stopped Cisco nolan service.
[ OK ] Stopped Cisco system time saving.
Stopping Cisco syslog service...
[ OK ] Stopped Cisco syslog service.
[ OK ] Stopped Cisco Kclick.
Stopping Cisco Kclick...
[ OK ] Stopped Cisco S15platform.
Stopping Cisco S15platform...
[ OK ] Stopped Cisco Kclick.
Stopping Cisco Kclick...
[ OK ] Stopped Cisco nss service.
Stopping Cisco nss service...
[ OK ] Stopped Cisco pkg install service.
Stopping Cisco pkg install service...
Stopping Cisco S10 boot service...
[ OK ] Stopped Cisco S10 boot service.
[ OK ] Stopped target Local File Systems.
Unmounting /tmp/var/run/netns...
[*05/10/2024 15:19:26.8241] umount: can't unmount /tmp/var/run/netns: Device or resource busy
[ OK ] Stopped Cisco system time setup.
Stopping Cisco system time setup...
Stopping Cisco seed generation...
Unmounting /sys/kernel/debug...
[ OK ] Stopped Cisco fips check.
Stopping Cisco fips check...
Unmounting /storage...
Unmounting /pstore...
Unmounting /storage2...
Unmounting /click...
[ OK ] Stopped Cisco platform file generation.
Stopping Cisco platform file generation...
[ OK ] Failed unmounting /tmp/var/run/netns.
[ OK ] Stopped Cisco seed generation.
[ OK ] Unmounted /sys/kernel/debug.
[ OK ] Unmounted /storage.
[ OK ] Unmounted /pstore.
[ OK ] Unmounted /storage2.
[ OK ] Unmounted /click.
Unmounting /tmp...
[*05/10/2024 15:19:27.6764] systemd[1]: Failed unmounting /tmp/var/run/netns.
[*05/10/2024 15:19:28.0497] umount: can't unmount /tmp: Device or resource busy
[ OK ] Failed unmounting /tmp.
[ OK ] Reached target Unmount All Filesystems.
[ OK ] Stopped target Local File Systems (Pre).
[ OK ] Stopped target Cisco File Systems (Pre).
[ OK ] Stopped Cisco early mount.
Stopping Cisco early mount...
[ OK ] Stopped Cisco UBIFS reformat/mount.
Stopping Cisco UBIFS reformat/mount...
[ OK ] Removed slice system.slice.
[ OK ] Removed slice -.slice.
[ OK ] Reached target Shutdown.

回复： AP1815W系统AIR-AP1815-K9-ME-8-10-190-0.tar启动故障

sufee — Fri, 18 Apr 2025 13:30:15 GMT

系统升级8.10.196.0版本，想配置Cisco Mobility Express模式，AP1815W不断重启，怎么解决？

回复： AP1815W系统AIR-AP1815-K9-ME-8-10-190-0.tar启动故障

sufee — Mon, 28 Apr 2025 07:21:01 GMT

[*04/28/2025 07:14:50.1099] ***** FAILED TO START VAP[0] apr0v0 3 try*****
[*04/28/2025 07:14:50.1099]
[*04/28/2025 07:14:50.1099] DOT11_DRV[0]: *** Triggered FW assert for radio failure (VAP start failure)
[*04/28/2025 07:14:50.1099]
[*04/28/2025 07:14:50.1099] DOT11_DRV[0]: Stop Radio0
[*04/28/2025 07:14:50.5499] osif_vap_stop:Timeout for VAP-16 start response event
[*04/28/2025 07:14:50.5499] DOT11_DRV[0]: *** Resetting Radio 0
[*04/28/2025 07:14:50.5699] DOT11_DRV[1]: Stop Radio1
[*04/28/2025 07:14:50.5699] DOT11_DRV[1]: Start Radio1
[*04/28/2025 07:14:51.5899] Flexconnect Switching to Standalone Mode!
[*04/28/2025 07:15:01.6799] Discovery Response from 192.168.1.100
0.7%[*04/28/2025 07:15:10.5599] DOT11_DRV[0]:
[*04/28/2025 07:15:10.5599]
[*04/28/2025 07:15:10.5599] *** Warning: FW dump after assert didn't finish in time***
[*04/28/2025 07:15:10.5599]
[*04/28/2025 07:15:10.5599] Received reboot request event 'radio failure(radio recovery failed)'

Writing reload timestamp (Mon Apr 28 07:15:10 UTC 2025) to disk

[*04/28/2025 07:15:11.0000]
[*04/28/2025 07:15:11.0000] CAPWAP State: DTLS Setup
[04/28/2025 07:15:11.5999] UBIFS: un-mount UBI device 0, volume 3
[04/28/2025 07:15:11.6599] UBIFS: background thread "ubifs_bgt0_3" stops

The system is going down NOW!
Sent SIGTERM to all processes
Sent SIGKILL to all processes
Requesting system reboot99]
[04/28/2025 07:15:13.7499] reboot: Restartoard type: AP1815W
smem ram ptable found: ver: 1 len: 3

控制器AP1832i-B，AP1815W-H始终不join？请问大神是什么问题？

回复： AP1815W系统AIR-AP1815-K9-ME-8-10-190-0.tar启动故障

Rps-Cheers — Tue, 29 Apr 2025 13:33:28 GMT

从如上的log看，似乎是你的AP1815的radio有问题，无法注册到控制器也符合预期。

***** FAILED TO START VAP[0] apr0v0 3 try*****

此外，有如下两点建议：

1.AP1832作为ME，需要考虑AP1815和AP1832 ME的版本是否一致，如果不一致，可以考虑提前将版本升级到一致，或者下载zip文件放在tftp服务器，让AP注册时自动同步。

2.AP1832的country code是否正常，-H是CN，可以关注一下。

回复： AP1815W系统AIR-AP1815-K9-ME-8-10-190-0.tar启动故障

sufee — Wed, 30 Apr 2025 01:41:17 GMT

AP1832i-B AP1815W-H 国家代码：CN，US 都刷的AIR-AP1830-K9-ME-8-5-182-0.tar、AIR-AP1815-K9-ME-8-5-182-0.tar版本

(Cisco Controller) >show boot
Primary Boot Image............................... 8.5.182.0 (default) (active)
Backup Boot Image................................ 8.10.196.0

(Cisco Controller) >show country

Configured Country............................. Multiple Countries : CN,US
Configured Country Codes
CN - China..................................... 802.11a Indoor,Outdoor / 802.11b / 802.11g
US - United States............................. 802.11a Indoor,Outdoor / 802.11b / 802.11g

回复： AP1815W系统AIR-AP1815-K9-ME-8-10-190-0.tar启动故障

Rps-Cheers — Wed, 30 Apr 2025 02:36:37 GMT

看到你这里使用的两个AP进行都是mobility express的镜像，它们都按控制器的模式使用吗？

如果只需要AP1815注册到AP1830的话，在radio没有问题的情况下：

1.可以尝试将ME的模式修改为LAP模式，比如Console到AP1815 AP，apciscoshell进入LAP模式，配置ap-type capwap应该就可以转换到LAP模式；

2.直接将AP1815更换为LAP镜像，如8.5.182的LAP镜像为ap1g5-k9w8-tar.153-3.JF15.tar

这样防止两台AP都进入了ME控制器模式，网络中就独立存在两台控制器了，而不是一台AP作为LAP注册到另外一台作为控制器的AP。

回复： AP1815W系统AIR-AP1815-K9-ME-8-10-190-0.tar启动故障

sufee — Wed, 30 Apr 2025 07:46:24 GMT

CAPWAP State: DTLS Setup
CAPWAP State: DTLS Teardown
No more AP manager addresses remain..
No valid AP manager found for controller 'Cisco_d' (ip: 192.168.x.xxx)
Failed to join controller Cisco_d.
Failed to join controller.
CAPWAP State: Discovery
Discovery Request sent to 192.168.x.xxx, discovery type STATIC_CONFIG(1)
Discovery Request sent to 255.255.255.255, discovery type UNKNOWN(0)
Discovery Response from 192.168.x.xxx

AP#ap-type capwap

AP Running Image : 8.5.182.0
Primary Boot Image : 8.5.182.0
Backup Boot Image : 8.10.196.0
AP Image type : MOBILITY EXPRESS IMAGE
AP Configuration : NOT MOBILITY EXPRESS CAPABLE

AP#archive download-sw /reload tftp://192.168.1.101/ap1g5-k9w8-tar.153-3.JF15.tar
-=O#- # # #

我想刷机更新不了，怎么解决？