topic Re: Eigrp help plz in Switching

Eigrp help plz

shaila_rox — Tue, 05 Mar 2019 22:27:00 GMT

hi guys, suppose i have 2 routers connected via their 2 serial interfaces like this

router A serial 0 to router B serial 0

router A serial 1 to router B serial 1

now lets suppose i have configured a loopback interface on router b, eigrp from router A will select both serial 0 and 1 to forward packets to tht network means loadbalance, how can i prevent this ?? like i want the packets to go from s 0 not s 1 ???

Re: Eigrp help plz

Harold Ritter — Mon, 19 Feb 2007 19:00:28 GMT

You need to increase the metric on interface serial 1. This can be done by either increasing the delay or reducinf the bandwidth of interface serial 1.

Interface serial 1

delay

bandwidth

Hope this helps,

Re: Eigrp help plz

shaila_rox — Tue, 20 Feb 2007 07:41:03 GMT

thank u, is there any other way also to do this like thru policy based routing or some other way ?? plz tell me

Re: Eigrp help plz

a.hajhamad — Tue, 20 Feb 2007 08:36:19 GMT

Hi,

Source based routing can be done at your case, but this will be permenant, all the source subnet will be directly forwarded to the required interface.

Re: Eigrp help plz

shaila_rox — Tue, 20 Feb 2007 09:08:44 GMT

can u tell me how to do it plz ?

Re: Eigrp help plz

a.hajhamad — Tue, 20 Feb 2007 09:20:34 GMT

http://www.cisco.com/en/US/products/ps6599/products_white_paper09186a00800a4409.shtml#wp14033

http://www.cisco.com/en/US/products/sw/iosswrel/ps1828/products_configuration_guide_chapter09186a00800ca590.html

Re: Eigrp help plz

purohit_810 — Tue, 20 Feb 2007 15:37:30 GMT

Hi,

It is not doing authentication by ACS server, simple pc authentication it is showing. Your PC is not in Domain but remote pc is in domain... that is the reason it is asking for domain.

Please instal server addition and install ACS on it. Please.

After authenticate with domain database, when any user's profile you are creating on ACS server.

Have did above?? Pleaserevert me.

Regards,

Dharmesh Purohit