topic Re: WCCP CONFIGURATION in Switching

WCCP CONFIGURATION

hanyelbelqasy — Wed, 06 Mar 2019 22:30:08 GMT

Dears

I have aproblem in configuring WCCP on cisco 6500 switch so could you pls help me to know if this IOS support or not the IOS is System image file is "sup-bootflash:s72033-ipservices_wan-mz.122-33.SXH5.bin"

and if support could you help me to configure it\

thanks

Re: WCCP CONFIGURATION

Yogesh Ramdoss — Mon, 13 Dec 2010 16:53:00 GMT

Hello,

Yes, WCCP is supported in Cat6500 running 12.2(33)SXH releases.

WCCP Network Integration with Cisco Catalyst 6500

http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps708/white_paper_c11-629052.html

Regards,

Yogesh

Re: WCCP CONFIGURATION

tojackson — Mon, 13 Dec 2010 17:02:25 GMT

I have a performance issue with WCCP using Websense V100000 Content filters. Wehnever we increase the WCCP redirected traffic all Internet connectivity slows down extremely. Are there any WCCP tuining parameters? WCCP is enabled on a Catalyst 6509, WS-X6K-S2U-MSFC2, IOS version 12.2(18)SXF16.

Re: WCCP CONFIGURATION

Yogesh Ramdoss — Mon, 13 Dec 2010 17:16:08 GMT

Hello,

Performance/scabality of WCCP in Cat6500 depends on various factors like:

- type of redirection (L2 Vs. GRE)

- type of assigment (Hash Vs. Mask)

- # of bits used (to load-balance) in MASK method (# of bits influence TCAM usage)

If you would like to look at in-depth, a TAC Service Request would help.

- Yogesh

Re: WCCP CONFIGURATION

hanyelbelqasy — Tue, 14 Dec 2010 05:20:30 GMT

Thanks my friends for these informations ,I also need to configure it so could you help me to configure it ?

thanks