tema Basic IOS update question en Switching

Basic IOS update question

cluovpemb — Thu, 07 Mar 2019 18:36:33 GMT

Hi all. Normally for an IOS update I'll do the copy tftp: flash: process.

Yet for embedded access points on a router, for example the one I work with on the 891W router, the following seems to be the command to use:

AP#archive download-sw /force-reload /overwrite tftp://192.168.0.168/ap801-k9w7-tar.124-21a.JY.tar

Is there any reason why I can't just use the first method or does the AP only allow this "archive" command? I don't wnat to test and have to find some obscure way to recover a botched IOS update on an embedded AP so I must ask here.

Thank you!

Basic IOS update question

John Blakley — Fri, 14 Dec 2012 17:27:07 GMT

Colin,

I can tell you that normal APs use the tar archive because there are a bunch of subdirectories that are used for the flash image. The IOS file (non-tar) is a single file that gets decompressed on bootup. I have never done an upgrade on an 891W, but for APs, yes, the archive process is normal.

HTH,
John

*** Please rate all useful posts ***

Basic IOS update question

shillings — Fri, 14 Dec 2012 17:29:51 GMT

I think it's because it's a 'tar' file, not a 'bin' file. The archive command seems to be more sophosticated and will create the necessary directory structure on your flash. And as you can see, the additional keywords enable you to enforce a reload and overwrite the existing software, including directories.

Basic IOS update question

Leo Laohoo — Fri, 14 Dec 2012 23:00:45 GMT

AP#archive download-sw /force-reload /overwrite tftp://192.168.0.168/ap801-k9w7-tar.124-21a.JY.tar

The filename in this command is for the built-in WAP, an AP802. What you are doing is upgrading the autonomous IOS of the AP802 WAP.

When it comes to WAPs, I would recommend you use the automated "archive download-sw" because sometimes the TAR files contain upgrade drivers.

The router, by itself, you use the "copy" command because router IOS-es are all BIN files.

Basic IOS update question

cluovpemb — Mon, 17 Dec 2012 18:29:25 GMT

I had never though to look at what's actually inside the tar file - stupid me. what you guys are saying totally makes sense.

Thanks very much for the info!