SwitchingのトピックHow to see "debug ip ospf events "

How to see "debug ip ospf events "

solemdoms5 — Thu, 07 Mar 2019 19:07:05 GMT

RA#debug ip ospf events

00:37:50: OSPF: Rcv pkt from 172.16.3.2, FastEthernet0/1, area 0.0.0.3

00:37:54 OSPF: Rcv hello from 192.168.2.1 area 0.0.0.1 from FastEthernet0/0 172.16.2.2

I want to know the meaning of these outcome .

especially

00:37:54 OSPF: Rcv hello from 192.168.2.1 area 0.0.0.1 from FastEthernet0/0 172.16.2.2

RA received hello from 192.168.2.1 area 0 and what ??

also Is there any Documentation or URL which explain how to see all debug outcome ?

for example , debug ip rip , debug ip packet
debug ip ospf packet

etc... I really need to figure out the outcome of these debug command .

How to see "debug ip ospf events "

Reza Sharifi — Wed, 16 Jan 2013 13:25:24 GMT

To display information on Open Shortest Path First (OSPF)-related events, such as adjacencies, flooding information, designated router selection, and shortest path first (SPF) calculation, use the

debug ip ospf events

Command reference guide:

http://www.cisco.com/en/US/docs/ios/12_3/debug/command/reference/dbg_i2g.html#wp1018767

HTH

How to see "debug ip ospf events "

solemdoms5 — Wed, 16 Jan 2013 14:12:02 GMT

thank you for reply and the link URL .

but I couldnt find what i want to know about this in the link .

00:37:54 OSPF: Rcv hello from 192.168.2.1 area 0.0.0.1 from FastEthernet0/0 172.16.2.2

In this output ,

Rcv hello from 192.168.2.1 area 0.0.0.1 →　means from neighbor 192.168.2.1 ( area 1) RA got the hello packet .

is this correct ?

if so ,

What does mean by " from FastEthernet0/0 172.16.2.2" ???

please help me out

How to see "debug ip ospf events "

cadet alain — Wed, 16 Jan 2013 14:15:11 GMT

Hi,

192.168.2.1 is the OSPF RID from the neighbour and the hello was received on Fastethernet0/0 and the IP address of the interface sending the hello is 172.16.2.2.

Regards.

Alain

Don't forget to rate helpful posts.