topic Re: IGMP Configuration on 857w in Switching https://community.cisco.com/t5/switching/igmp-configuration-on-857w/m-p/933879#M53756 <HTML><HEAD></HEAD><BODY><P>Hi</P><P></P><P>"ip pim..." command is not available on 857w routers.</P><P></P><P>Regards, </P><P>Juan.</P></BODY></HTML> Tue, 13 May 2008 12:57:34 GMT wahezu 2008-05-13T12:57:34Z IGMP Configuration on 857w https://community.cisco.com/t5/switching/igmp-configuration-on-857w/m-p/933877#M53754 <P>Hi,</P><P></P><P>I'm trying to enable igmp on a interface on a Cisco 857w and I don't know how to do it.</P><P></P><P></P> Wed, 06 Mar 2019 06:56:02 GMT https://community.cisco.com/t5/switching/igmp-configuration-on-857w/m-p/933877#M53754 wahezu 2019-03-06T06:56:02Z Re: IGMP Configuration on 857w https://community.cisco.com/t5/switching/igmp-configuration-on-857w/m-p/933878#M53755 <HTML><HEAD></HEAD><BODY><P>Juan,</P><P></P><P>IGMP is enabled by default on an interface that is configured for PIM (i.e. "ip pim dense-mode|sparse-mode|sparse-dense-mode).</P><P></P><P>Regards,</P></BODY></HTML> Tue, 13 May 2008 11:43:35 GMT https://community.cisco.com/t5/switching/igmp-configuration-on-857w/m-p/933878#M53755 Harold Ritter 2008-05-13T11:43:35Z Re: IGMP Configuration on 857w https://community.cisco.com/t5/switching/igmp-configuration-on-857w/m-p/933879#M53756 <HTML><HEAD></HEAD><BODY><P>Hi</P><P></P><P>"ip pim..." command is not available on 857w routers.</P><P></P><P>Regards, </P><P>Juan.</P></BODY></HTML> Tue, 13 May 2008 12:57:34 GMT https://community.cisco.com/t5/switching/igmp-configuration-on-857w/m-p/933879#M53756 wahezu 2008-05-13T12:57:34Z