topic Re: What is the show command to see what fan tray is in a switch in Switching

What is the show command to see what fan tray is in a switch

tiki_turtle — Tue, 05 Mar 2019 21:11:18 GMT

I have 4000, 4500 and 6500 switches - how would i determine what fan tray I have in my switch?

Re: What is the show command to see what fan tray is in a switch

dgahm — Tue, 05 Dec 2006 20:53:17 GMT

For a CAT OS 6500:

show environment cooling

Chassis per slot cooling capacity : 83 cfm

Fan tray(s) cooling capacity :

Fan Model Ver Cooling Ambient FanStatus

capacity temp

---- ------------------- --- -------- ------- ---------

1 WS-C6K-13SLOT-FAN2 2 1090 cfm -

Re: What is the show command to see what fan tray is in a switch

ajagadee — Tue, 05 Dec 2006 21:47:54 GMT

Hi,

For Catalyst 4500.

Cat4507a#sh environment status

Power Fan Inline

Supply Model No Type Status Sensor Status

------ ---------------- --------- ----------- ------- -------

PS1 PWR-C45-1000AC AC 1000W good good n.a.

PS2 PWR-C45-1000AC AC 1000W good good n.a.

Power supplies needed by system : 1

Power supplies currently available : 2

Chassis Type : WS-C4507R

Power consumed by backplane : 40 Watts

Supervisor Led Color : Green

Module 1 Status Led Color : Green

Module 2 Status Led Color : Green

Module 3 Status Led Color : Green

Module 4 Status Led Color : Green

Fantray : Good

Power consumed by Fantray : 50 Watts

Regards,

Arul

** Please rate all helpful posts **

Re: What is the show command to see what fan tray is in a switch

ajagadee — Tue, 05 Dec 2006 21:52:51 GMT

For Catalyst 4500, Cat OS: Show System

Cat4506a(enable) show system

PS1-Status PS2-Status PS3-Status PEM Installed PEM Powered

---------- ---------- ---------- ------------- -----------

ok ok none yes yes

Fan-Status Temp-Alarm Sys-Status Uptime d,h:m:s Logout

---------- ---------- ---------- -------------- ---------

ok off ok 143,10:44:26 20 min

PS1-Type PS2-Type PS3-Type

------------ ------------ ------------

WS-X4008 WS-X4008 none

Modem Baud Traffic Peak Peak-Time

------- ----- ------- ---- -------------------------

disable 9600 0% 0% Thu Jul 13 2006, 05:24:18

Power Capacity of the Chassis: 2 supplies

System Name System Location System Contact CC

------------------------ ------------------------ ------------------------ ---

Cat4506(enable)

Regards,

Arul

** Please rate all helpful posts **

Re: What is the show command to see what fan tray is in a switch

bjw — Tue, 05 Dec 2006 23:21:03 GMT

Show env cool

Re: What is the show command to see what fan tray is in a switch

bjw — Tue, 05 Dec 2006 23:23:54 GMT

Also try,

http://www.cisco.com/en/US/customer/products/hw/switches/ps4324/products_field_notice09186a008011764d.shtml#hwlevel