Force interface UP/UP in Nexus 9000

saul alonso ramos — Fri, 15 Oct 2021 13:20:01 GMT

Hi,

We are trying to get a Nexus port (which is a span destination for Rx) to be up and transmit even if Rx is not connected in it.

In other cisco platforms you could achieve this by using the no keepalive command but seems to be taken out in the N9K platform.

Thanks!

Re: Force interface UP/UP in Nexus 9000

Sergiu.Daniluk — Fri, 15 Oct 2021 14:29:08 GMT

You can do that for SVIs using "no autostate", but you do not have an option to bring up a physical port if no RX power is received on it.

Stay safe,

Sergiu