topic Re: Different OSPF-COST for diferent VLAN in a 6500 in Server Networking

Different OSPF-COST for diferent VLAN in a 6500

m.villargonzalez — Tue, 15 Jan 2002 11:34:43 GMT

How i can assign a different OSPF COST to different

VLANs if I am using a 6500? I can reach with IP

using OSPF an specific IPAddress through three different VLANS or ports. How can I do if I want

that each different path has a diferent cost(weight).

Re: Different OSPF-COST for diferent VLAN in a 6500

ciscomoderator — Mon, 21 Jan 2002 20:07:01 GMT

Often times complex configuration issues are best addressed in an interactive session with one of our trained technical assistance engineers. While other forum users may be able to help, it’s often difficult to do so for this type of issue.

To utilize the resources at our Technical Assistance Center, please visit http://www.cisco.com/tac and to open a case with one of our TAC engineers, visit http://www.cisco.com/tac/caseopen

If anyone else in the forum has some advice, please reply to this thread.

Thank you for posting.

Re: Different OSPF-COST for diferent VLAN in a 6500

rickwilliams — Mon, 21 Jan 2002 21:47:00 GMT

You might check the "ip ospf cost" command for this. See documentation at:

<http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/index.htm>

and

<http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/index.htm>

You might also want to post this type of question in the "LAN, Switching and Routing" forum.

regards,

Rick.